its at the gatekeeper... the broadcast GRQ's are getting through because they're on the same network... I'm trying to get this to work in our development offices before it enters testing. I wont be able to test it in a setting where there are multiple networks for quite a while... I disabled the Broadcast Listener so it would just respond to the multicasts... Mike Mike On 4/28/05, Stewart Nelson <sn@xxxxxxxxxxx> wrote: > Hi Mike, > > Was this capture taken at the endpoint or at the gk? > > If at the gk, the broadcast GRQs seem to be getting > through; just enable the normal response to them and > you should be fine without using multicast. > > If at the endpoint, well, it isn't sending out any > multicast GRQs, so gnugk won't receive any ;) > Perhaps you should ask QTI or the OpenH323 folks. > > --Stewart > > ----- Original Message ----- > From: "Michael Ditum" <mrskensington@xxxxxxxxx> > To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx> > Sent: Thursday, April 28, 2005 9:38 AM > Subject: Multicast Discovery > > I'm trying to get multicast discovery to work as our system will have to be > used on networks with switches that don't pass on broadcast traffic. But I'm > having trouble getting it to work. > > I'm using openphone configured to "Discover Automatically" the gatekeeper > but it just comes up with a message saying "Could not find the gatekeeper on > LAN" > > I've tried examining whats happening using ethereal... I confiigured it with > filter "igmp && h225" you can view the ethereal dump at > > http://leary.csoft.net/~mjd/ethereal.dump > > and the text version at > > http://leary.csoft.net/~mjd/server.txt > > I ran gnugk with the following command line > > gnugk -ttttt -o /var/log/gnugk.log -c /etc/gnugk/gnugk.ini > > there was no output after i started openphone so it appears that gnugk isn't > handling the discovery. > > you can view the log at... > > http://leary.csoft.net/~mjd/gatekeeper.log > > You can view my gatekeeper.ini at > > http://leary.csoft.net/~mjd/gatekeeper.ini > > does anyone have any ideas why it may not be working??? > > thanks > > Mike > > ------------------------------------------------------- > SF.Net email is sponsored by: Tell us your software development plans! > Take this survey and enter to win a one-year sub to SourceForge.net > Plus IDC's 2005 look-ahead and a copy of this survey > Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix > _______________________________________________________ > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/ > ------------------------------------------------------- SF.Net email is sponsored by: Tell us your software development plans! Take this survey and enter to win a one-year sub to SourceForge.net Plus IDC's 2005 look-ahead and a copy of this survey Click here to start! http://www.idcswdc.com/cgi-bin/survey?id5hix _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id?49 Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
