Re: Acct-Session-Id Unique or Conf-id Unique ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Thanks for reply .. But GK and Radius are running at the same server..
Here is below from radius detail log ..

Fri Jan  7 18:49:08 2005
        Acct-Status-Type = Stop
        NAS-IP-Address = xx.xx.xx.xx
        NAS-Identifier = "TestGK"
        NAS-Port-Type = Virtual
        Service-Type = Login-User
        Acct-Session-Id = "41dd827300004eef"
        User-Name = "xxxx"
        Framed-IP-Address = xx.xx.xx.xx
        Acct-Session-Time = 1560
        Calling-Station-Id = "991151"
        Called-Station-Id = "880821714504"
        H323-conf-id = "h323-conf-id=71374C48 14A43016 3CA10507 1AF6A59"
        H323-gw-id = "h323-gw-id=TestGK"
        H323-call-origin = "h323-call-origin=proxy"
        H323-call-type = "h323-call-type=VoIP"
        H323-setup-time = "h323-setup-time=18:22:46.000 BDT Fri Jan 07 2005"
        H323-connect-time = "h323-connect-time=18:23:08.000 BDT Fri Jan 07 2005"
        H323-disconnect-time = "h323-disconnect-time=18:49:08.000 BDT
Fri Jan 07 2005"
        H323-disconnect-cause = "h323-disconnect-cause=0"
        H323-remote-address = "h323-remote-address=xxx.xxx.xxx.xxx"
        Cisco-AVPair = "h323-ivr-out=h323-call-id:72374C48 14A43016
3CA10507 1AF6A59"
        Acct-Delay-Time = 0
        Client-IP-Address = 127.0.0.1
        Timestamp = 1105102148
        Request-Authenticator = Verified

Tue Jan 18 19:49:51 2005
        Acct-Status-Type = Stop
        NAS-IP-Address = xx.xx.xx.xx
        NAS-Identifier = "TestGK"
        NAS-Port-Type = Virtual
        Service-Type = Login-User
        Acct-Session-Id = "41eaa20f0000753e"
        User-Name = "xxxx"
        Framed-IP-Address = xx.xx.xx.xx
        Acct-Session-Time = 104
        Calling-Station-Id = "991151"
        Called-Station-Id = "88028126483"
        H323-conf-id = "h323-conf-id=71374C48 14A43016 3CA10507 1AF6A59"
        H323-gw-id = "h323-gw-id=TestGK"
        H323-call-origin = "h323-call-origin=proxy"
        H323-call-type = "h323-call-type=VoIP"
        H323-setup-time = "h323-setup-time=19:47:54.000 BDT Tue Jan 18 2005"
        H323-connect-time = "h323-connect-time=19:48:07.000 BDT Tue Jan 18 2005"
        H323-disconnect-time = "h323-disconnect-time=19:49:51.000 BDT
Tue Jan 18 2005"
        H323-disconnect-cause = "h323-disconnect-cause=0"
        H323-remote-address = "h323-remote-address=xxx.xxx.xxx.xxx"
        Cisco-AVPair = "h323-ivr-out=h323-call-id:72374C48 14A43016
3CA10507 1AF6A59"
        Acct-Delay-Time = 0
        Client-IP-Address = 127.0.0.1
        Timestamp = 1106056191
        Request-Authenticator = Verified


Thanks ..

Regards.

..Tusar.. 


On Tue, 18 Jan 2005 15:26:25 +0200, Teodor Georgiev
<t.georgiev@xxxxxxxxx> wrote:
> 
> 
> It might be a duplicate Radius packet for the same call ?
> This causes with Radius servers running at a burden they can't stand
> or a bad IP link. This causes the "Radius client" to resend the AAA packet
> once again. The only difference between such two packets is the Acct-Delay
> field. In such cases your billing application has to deal properly with those
> "delayed" packets.
> 
> 
> On Tuesday 18 January 2005 14:23, Tusar wrote:
> > Hi,
> >
> > We have integrated Radius with GnuGK and it's running well .
> > But facing some problem with "Acct-Session-Id" , we guessed
> > "Acct-Session-Id" is unique but found sometimes it is getting
> > duplicate , so we are loosing bill .
> >
> > Is "Acct-Session-Id" Unique or "Conf-id" Unique or which field should
> > be unique ?
> > For accounting purpose it is very important for us .
> >
> > Another question is ..
> >
> > Scenerio-1:
> > ===========
> >
> >                 > Endpoint-2
> >
> >               /
> > EndPoint-1 --> GnuGK -->
> >               \
> >
> >                 > EndPoint-3
> >
> > When I am trying to transfer (which call was from Endpoint-1) from
> > Endpoint-2 to EndPoint-3 is working fine .
> >
> > Scenerio-2:
> > ===========
> >
> >                          > Endpoint-1
> >
> >                        /
> > PSTN --> Quintum --> GnuGK -->
> >                       \
> >
> >                         > EndPoint-2
> >
> > From PSTN to Endpoint-1 or Endpoint-2 direct calling working fine .
> > But when I am trying to transfer (which call was from PSTN) from
> > Endpoint-1 to EndPoint-2 is failing .
> >
> > How can I transfer from PSTN to EndPoint-1's call to EndPoint-2 ? Pls help
> > me .
> >
> >
> > Regards ..
> >
> > Thanks in advanced .
> >
> >
> > ..Tusar..
> >
> >
> _______________________________________________________
> 
> List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> Homepage: http://www.gnugk.org/
>


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt

_______________________________________________________

List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux