Re: No ringing tone

[Kyriakos Oikonomakos <kyriakos.oikonomakos@xxxxxxxxx>]

The ringing tone is always produced from some gateway (VoIP or not) 
between the two endpoints. Typically this ringing sound should be 
produced as close as possible to the originating side. Gnugk is just 
exchanging the messages between the two gateways and since you can see 
that the ALERTING message is exchanged then you should check your 
gateway configuration.


Regards,
Kyriakos


----OFF TOPIC----
Since you are using cisco have a look at the progress_ind command (it 
should be given inside a dial-peer configuration).

(http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_command_
reference_chapter09186a00800b350f.html#wp999970)


Rafat Subhan wrote:
> this is log
> 2004/09/13 05:26:53.707 3 ProxyChannel.cxx(736) Q931(1568) Connect to
[......]
> 2004/09/13 05:27:05.066 5  ProxyThread.cxx(379) Q931d Reading from
> 82.165.42.12:1720
> 2004/09/13 05:27:05.066 3 ProxyChannel.cxx(431) Q931d Received: Alerting
> CRV=22149 from 82.165.42.12:1720
> 2004/09/13 05:27:05.066 4 ProxyChannel.cxx(387) Q931 Received: {
[....]


-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM. 
Deadline: Sept. 13. Go here: http://sf.net/ppc_contest.php

_______________________________________________________

List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/