Try the following. With this config I can connect from outside to a client behind the NAT box (gnugk 2.08). The proxy must be on the NAT box and must accept the specified ports.. What I want to know. The default value for CallSignalPort is 1721. Therefore I expectet that the proxy will return this port in the transport address, but the client (ohphone) wnat to connect to 1720. [RoutedMode] GKRouted=1 H245Routed=1 CallSignalPort=1720 RemoveH245AddressOnTunneling=1 DropCallsByReleaseComplete=1 SupportNATedEndpoints=1 AcceptNeighborsCalls=1 Q931PortRange=some range H245PortRange=some range [Proxy] Enable=1 InternalNetwork=192.168.0.0/16 T120PortRange=some range RTPPortRange=some range =============================================================== On Mon, Sep 06, 2004 at 12:43:05PM +0300, Sait KARALAR wrote: > Same problem I have with a little differences. > But your problem solved by me. > > I configured Quintum behind NAT (ADSL connection) > > It has been registered to gnugk with internal 192.168.x.x IP. > > I changed configuration of ADSL Modem (port forwarding) and quintum's > auto external IP discovery settings (have a quick look at the > www.quintum.com/support search var_config.cfg if you need) > Read PDF's for this. > Auto External IP (if no Static IP you have) > http://www.quintum.com/support/xplatform/network/Auto_External_IP.pdf > > Howto behind NAT/ Firewall > http://www.quintum.com/support/xplatform/network/Tenor-Firewall-NAT.pdf > > and then, quintum registered to gnugk as its real ip (gk.ini should have > NATed endpoint support) > This helps you to do. > > Everything looks good. But I have still problem. > > I cannot make call via quintum. although it has been registered. > In fact, after registration, when I try to call, it never send and packets > to GK. > If I use real IP, I can send calls. But when I registered with above NATed > configuration. GK understands it as NATed endpoint. But It do NOT send > calls. > > What's wrong! I still cannot find. I checked all required PORTS. > > any idea ? > note that, when I try to call, no LRQ, ARQ, etc. and any other package I > received... > > On Mon, 6 Sep 2004 01:58:52 -0700 (PDT), xie jiangbo <newer2k@xxxxxxxxx> > wrote: > > >As we know,many company connect to internet via ADSL or leased LINE and > >the have only few public intenet address.So NAT is used when people in > >NAT make a call to the outside NAT side,this works very well.But if > >somebody outside the NAT(e,g in another country) want to make a call to > >the people inside the NAT,how to config the gk.ini? > > > > > >--------------------------------- > >Do you Yahoo!? > >Y! Messenger - Communicate in real time. Download now. > > > > -- > Sait KARALAR > Intersan voIP Telephony > > > ------------------------------------------------------- > This SF.Net email is sponsored by BEA Weblogic Workshop > FREE Java Enterprise J2EE developer tools! > Get your free copy of BEA WebLogic Workshop 8.1 today. > http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click > > _______________________________________________________ > > List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Homepage: http://www.gnugk.org/ ------------------------------------------------------- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
