Hi Jorge, 1. Get the ATA 'talking' on your network. If you need to assign a static IP, use the IVR to set up IP, netmask, default gateway. If you have DHCP, find the IP from your DHCP server, with Ethereal, or with the IVR. 2. Open http://your.ata.ip/dev to configure. 3. set UID0 = some phone number compatible with your dial plan. 4. set GkOrProxy = ip address of gnugk. 5. set LoginID0 = name for your endpoint. 6. set UseLoginID = 1. 7. Click apply. Unit should register with gnugk. If not, check security settings, or use trace, Ethereal and/or NPrintf to find what's wrong. 8. Pick up phone. You should hear dial tone. Make call. If it doesn't work, you may need to change ConnectMode (e.g. fast start, H.245 tunneling) or DialPlan to be compatible with the rest of your network. If it still doesn't work, use the tools mentioned above, or post a more specific message. --Stewart ----- Original Message ----- From: "Jorge Augusto Senger" <jorge@xxxxxxxxxxx> To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx> Sent: Thursday, August 26, 2004 12:55 PM Subject: ATA186 + GTK > Hy! > Does anybody know the first steps do configure the Cisco ATA 186 with gnugk? > Thanks > J.A.Senger ------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
