Dear Everyone, I'm currently running a RedHat9 system with GNUGK 2.07 on Celeron 2.4G with 512MB DDR RAM. I've set up the GK so that it listens on port 1720 while having a min of 3 E1's pointing traffic towards this system. Problem I'm having is that the gnugk would stop running after about 15 mins when I'm in Proxy Mode when traffic is passed through this system. I've check the CPU utilazation by using "top" and it peaked at 60%-70% while traffice running through my NIC is approximately 100KB/s. Any ideas or experience with Gnugk stops running under this condition?!?! It is because of the system's CPU being slow or anything regarding the system's performance?? or is this some sort of bug in version 2.0.7??? Quoting Budiman Indra <indra.budiman@xxxxxxxxxxxxxxx>: > Dear Sergio, > > What I meant is I run gnugk on Dual Pentium 850 on Redhat Linux Desktop Ed > with 2 G Ram memory. Thus with a call generation of 120 calls simultanoes > session and callgenerator running on the same machine are using up to 90 % > CPU Usage. > > However, If you dont mind sharing , how do i see if the system is runnig out > of cpu cycles > or is woking on interrupts ? > > Thank you and regards, > > > > Message: 3 > From: Sergio Lenzi <enigma@xxxxxxxxxxxxxxxxx> > Organization: lztech > To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Subject: Re: Test Performance > Date: Mon, 16 Aug 2004 12:52:47 -0300 > Reply-To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > > On Monday 16 August 2004 06:17, Michal Zygmuntowicz wrote: > > If you could take some time and submit your > > test results at http://www.gnugk.org/interoperability.html > > it would be great. > > > > On Mon, 2004-08-16 at 08:06, Budiman Indra wrote: > > > Dear All > > > > > > Just another informations to share. > > > > > > I've did try Linux Based call generator software (Lanforge, > > > Miniacom and CallGen323) that points to the GnuGk compiled with > > > LargeFD_Set with 4 E1s of traffic running on Dual Processor PIII 850 > > > with 2 G Memory on Intel LB 440 GX+ motherboard. > > > > > > 1 E1 --- 35 % Cpu Load On the Average > > > 2 E1 --- 60 % Cpu Load On the Average > > > 3 E1 --- 80 % Cpu Load On the Average > > > 4 E1 --- 90 % Cpu Load On the Average > > > > > > Hello... did you mean that the gatekeeper is running on > a Linux with 2GB ....??? And E1 boards ?? > and this consumes 90% of cpu??? > > How many process/threads do you think there is in the > system or in the gnugk??? if you thinkd about 30lines > per E1 * 4 is 120 simultaneous calls using top, > you can see if the system is runnig out of cpu cycles > or is woking on interrupts... > > If is cpu, I recomend you try FreeBSD because > it is target to large loads and keep the cpu response > time in a better way... > > if you want you can > install gnugk & friends at: > pkg_add -v ftp://cwb.lztech.com.br/packages/All/gatekeeper-1.0.8_2.tbz > and the kernel too: > pkg_add -v ftp://cwb.lztech.com.br/packages/All/kernel-5.2.1.tbz > > it is compiled with postgresql libpq version 7.4.3.. > > > Sergio > > > --__--__-- > > > ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ ------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
