You probably need to setup some additional neighbor options. Please read the manual. There is a way to not forward LRQ, but to stay on the LRQ/signalling path. ----- Original Message ----- From: "David Stanaway" <kerneld@fastmail.com.au> Sent: Friday, February 06, 2004 9:14 PM > I am having a problem with the [RasServ::Neigbors] section. > > I have a gatekeeper of a provider listed here, and 2 local gatekeepers. > > like: > > localgk1=10.10.20.34:1719; > localgk2=10.10.20.35:1719; > providergk=1.2.3.4:1719;* > > > The provider expects all of the signalling to come from 1 IP, so I was > hoping to use the Routed mode functionality of the gnugk, but looking at > the trace logs, the gnugk is just forwarding the LRQs from localgk1 and > localgk2 to providergk. > > Is routed mode only intended for gw targets, or is there something I am > missing here? ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/