I would like to go slightly out of topic and to say something about quintum and gnugk: I saw that someone has "overwritten" my report about the compatibility between Quintum and GnuGK and reported some problems. It is completely wrong !!! I have numerous of installations of A400/A800, D3000, Call Relay (also CMS, because CMS "IOS" is the same like Call Relay) with GnuGK. Tested with: 1. RRQ (Quintum registers like a H323 endpoint/gateway to GnuGK) 2. LRQ (Quintum sends LRQ to GnuGK) 3. permanent endpoint (GnuGK sends calls to Quintum via Gw-GW signalling, but not vice versa). All of the above mentioned configurations work without any problems. They just work! So, if anyone has problems with the setup/knowledge - do not blame nor Quintum, neither GnuGK. Cheers! On Tuesday 30 December 2003 14:06, Melike KARAYOL wrote: > Hi all, > > I used openh323 gatekeeper with free radius and i want > to use quintum gateway. gatekeeper and radius > authentication works correctly. But when i want to > dial a number by ATA , after authentication call is > droped. error message as follows: > calledPartyNotRegistered > i think it is because of the quintum configuration. bt > i am not sure. can you help me about the error. > thanks all > > Melike ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
