Hello everybody. I have some troble configuring gnugk - I'm not even sure if I'm on the right way... Please, help me to understand how to make this thing work. My config is simple - I want my endpoint to register and then dial some destination. I set a destination to 5c./min. and when I call this destination radius replies in accounting responce h323 session time out; however, the endpoint continues to talk even after the timeout - going into negative ballance. The thing is that all this works fine with another GK, but not with gnugk. After reading mailing lists and manulal from top to bottom I haven't found any reason for my simple configuration to fail, on the other hand, it seems that it should work. Please point me in the right direction - I already spent too much time on such a simple problem... Thank you ### MY CONFIG: [Gatekeeper::Auth] RadAliasAuth=sufficient;RRQ [RadAliasAuth] Servers=127.0.0.1:1812 SharedSecret=huyhuyhuy [Gatekeeper::Acct] RadAcct=sufficient;start,stop,update #tried also: RadAcct=sufficient;start,stop [CallTable] AcctUpdateInterval=30 [RadAcct] Servers=127.0.0.1:1813 trong password SharedSecret=huyhuyhuy ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
