Maybe you should route the calls to GK1. You can setup it as a neighbor with some specific prefix. Then the call will be routed correctly through GK1 (Client4-GK2-GK1-PSTN1). ----- Original Message ----- From: "Sebastian Nocetti" <snocetti@fibertel.com.ar> Sent: Friday, December 12, 2003 4:37 PM > Hi, I want to configure more than 1 GK to place Calls to PSTN, in an > environment with Cisco AS5300 GW.... I want to do this > For example: > > > > Client1 ATA Client3 GW > Client2 ATA Client4 ATA > | | > | | > GK1 GK2 > | > | ---------- \--------------------------\ > | \ \ > GW PSTN1 GW PSTN2 GW PSTN3 > > > How you see, all GW PSTN are registered against GK1, but I want to place > calls to GW PSTN from GK2.... > > For example > > > GK1: > > GKRouted=1 > > PermanentEndpoints > GW1=xx.xx.xx.xx,1# > GW2=xx.xx.xx.xx,2# > GW3=xx.xx.xx.xx,3# > > > GK2: > GKRouted=1 > > Permanent EndPoints > GW1=xx.xx.xx.xx,1# > GW2=xx.xx.xx.xx,2# > GW3=xx.xx.xx.xx,3# > > > > Obviusly I want to mantain CDR's files for calls originated from both > GK.... > > In this example, if I place a Call from GK1 to GW1 for example, all work > OK, but when I want to place a call from GK2 to GW1, call is > disconnected after 180 secs.... I think this is because Signalling is > controlled by GK1 because GW1 is registered against that GK (GK1).... > And how call is not registered in GK1, is like a call that not exists > for GK1... > > Somebody knows how I can do this scenario example for all work OK?.... I > want GK1 make his own CDR and GK2 other one. > > GW are Cisco AS5300.... > > If someone knows something about this, please help me.... > > > > ------------------------------------------------------- > This SF.net email is sponsored by: SF.net Giveback Program. > Does SourceForge.net help you be more productive? Does it > help you create better code? SHARE THE LOVE, and help us help > YOU! Click Here: http://sourceforge.net/donate/ > _______________________________________________ > List: Openh323gk-users@lists.sourceforge.net > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Homepage: http://www.gnugk.org/ ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
