Re: using gnugk with Cisco ATA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Teodor and Andrey, thank you for the response. I had already done every one of your suggestions.
From the Ethereal traces I get the following lines:
11 2.402861 10.2.3.1 199.227.110.144 H.225.0 RAS: gatekeeperRequest
12 2.404838 199.227.110.144 10.2.3.1 H.225.0 RAS: gatekeeperConfirm


The Cisco ATA 186 is in a LAN behind a router but with all the necessary pinholes (as far as I understood, I need to forward ports 1717,1718,1719,1720,1721, right?). The ATA's local IP address is 10.2.3.1. The gatekeeper is running in my computer which is behind another LAN and all the necessary pinholes done in the router. My computer internal IP is 199.227.110.144
My gatekeeper config file is
[Gatekeeper::Main]
Fourtytwo=42
[GkStatus::Auth]
rule=allow
Name=OpenH323GK


In the ATA GkId field I have OpenH323GK. So, Andrey, I have the gatekeeper name set in both
gatekeeper.ini file and your ATA configuration.
But I did NOT get any RRQ message! (my router is forwarding all messages for ports 0 to 50000 to my computer where I have the gatekeeper).
Again, the only message that I get in the telnet window that I have connected to the gatekeeper is
GCF|10.2.3.1|4444:dialedDigits|unknown;


and when I ask for the statistics and registration history I get the following:

-- Endpoint Statistics --
Total Endpoints: 0  Terminals: 0  Gateways: 0  NATed: 0
Cached Endpoints: 0  Terminals: 0  Gateways: 0
-- Call Statistics --
Current Calls: 0 Active: 0 From Neighbor: 0 From Parent: 0
Total Calls: 0  Successful: 0  From Neighbor: 0  From Parent: 0
Startup: Thu, 30 Oct 2003 16:32:01 -0500   Running: 0 days 00:10:25
;
AllRegistrations
Number of Endpoints: 0
;

I tried to use the ATA with and without authentication and I always got the same result.
Do you have any other suggestion ?


Thanks in advance for any suggestion.




-- Endpoint Statistics -- Total Endpoints: 0 Terminals: 0 Gateways: 0 NATed: 0 Cached Endpoints: 0 Terminals: 0 Gateways: 0 -- Call Statistics -- Current Calls: 0 Active: 0 From Neighbor: 0 From Parent: 0 Total Calls: 0 Successful: 0 From Neighbor: 0 From Parent: 0 Startup: Thu, 30 Oct 2003 16:32:01 -0500 Running: 0 days 00:10:25 ; AllRegistrations Number of Endpoints: 0 ;


My Gatekeeper config file is the following: [Gatekeeper::Main] Fourtytwo=42 [GkStatus::Auth] rule=allow



From: Teodor Georgiev <teodor@egvrn.net>
Reply-To: openh323gk-users@lists.sourceforge.net
To: openh323gk-users@lists.sourceforge.net
Subject: Re:  using gnugk with Cisco ATA
Date: Fri, 31 Oct 2003 10:30:27 +0200


make sure that in ATA the "gkid" is the same, as the gatekeeper ID. Otherwise GRQ will be OK, but not RRQ.


On Friday 31 October 2003 10:16, Andrey S Pankov wrote:
> Hi, Andrew,
>
> Can you insure that ATA does send RRQ message to GnuGK?
> What do you have in trace level 5 GnuGK logs?
> You may use ethereal 0.9.15+ to capture and decode RAS messages.
>
> My guess is that you don't have you gatekeeper name set in both
> gatekeeper.ini file and your ATA configuration.
>
> Andrey.
>
> > Ray, thanks for the response.
> > I'm sure the ATA has the correct gatekeeper IP once I could check the
> > gatekeeper logs and there is where I got the line
> > GCF|10.2.3.1|4444:dialedDigits|unknown;
> > and as far as I understood from the gnugk documentation it by default
> > accepts calls from unregistered
> > endpoints.
> > Do you have any comments ?
> >
> > Thanks again
> >
> >
> > From: "Ray Jackman" <ray@havenet.com>
> >
> > >Reply-To: openh323gk-users@lists.sourceforge.net
> > >To: openh323gk-users@lists.sourceforge.net
> > >Subject: Re: using gnugk with Cisco ATA
> > >Date: Thu, 30 Oct 2003 17:13:08 -0500
> > >
> > > > Hi all,
> > > >
> > > > I'm using the Gatekeeper(GNU) Version(2.0.6) running over windows
> > > > 2000.
> > >
> > >The
> > >
> > > > Gatekeeper seems to run fine but I'm not able to register a Cisco ATA
> > >
> > >186
> > >
> > > > (with IP 10.2.3.1) as an endpoint (with E.164 number = 4444).
> > > > The only message that I get from the Gatekeeper is the following
> > > >
> > > > GCF|10.2.3.1|4444:dialedDigits|unknown;
> > >
> > >it looks like the ata is not registered.
> > >first make sure that the ata has the correct ip of your gatekeeper set
> > > in it for the line you are
> > >using.
> > >if that does not let it register, then you may try to select accept
> > > calls from unregistered
> > >endpoints in your conf file.
> > >
> > >regards
> > >ray
> > >
> > >
> > >-------------------------------------------------------
> > >This SF.net email is sponsored by: SF.net Giveback Program.
> > >Does SourceForge.net help you be more productive? Does it
> > >help you create better code? SHARE THE LOVE, and help us help
> > >YOU! Click Here: http://sourceforge.net/donate/
> > >_______________________________________________
> > >List: Openh323gk-users@lists.sourceforge.net
> > >Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> > >Homepage: http://www.gnugk.org/
> >
> > _________________________________________________________________
> > Add MSN 8 Internet Software to your current Internet access and enjoy
> > patented spam control and more. Get two months FREE!
> > http://join.msn.com/?page=dept/byoa
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: SF.net Giveback Program.
> > Does SourceForge.net help you be more productive? Does it
> > help you create better code? SHARE THE LOVE, and help us help
> > YOU! Click Here: http://sourceforge.net/donate/
> > _______________________________________________
> > List: Openh323gk-users@lists.sourceforge.net
> > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> > Homepage: http://www.gnugk.org/
>
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive? Does it
> help you create better code? SHARE THE LOVE, and help us help
> YOU! Click Here: http://sourceforge.net/donate/
> _______________________________________________
> List: Openh323gk-users@lists.sourceforge.net
> Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> Homepage: http://www.gnugk.org/


--
Best regards,

Teodor Georgiev
Information Services Plc.
Tel : +359 2 96562008
Mobile: +359 887 508989


------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/

_________________________________________________________________
Send instant messages to anyone on your contact list with MSN Messenger 6.0. Try it now FREE! http://msnmessenger-download.com




-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?   SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux