Re: using gnugk with Cisco ATA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> Hi all, 
>  
> I'm using the Gatekeeper(GNU) Version(2.0.6) running over windows 2000. The  
> Gatekeeper seems to run fine but I'm not able to register a Cisco ATA 186  
> (with IP 10.2.3.1) as an endpoint (with E.164 number = 4444). 
> The only message that I get from the Gatekeeper is the following 
>  
> GCF|10.2.3.1|4444:dialedDigits|unknown; 
>  
 
it looks like the ata is not registered. 
first make sure that the ata has the correct ip of your gatekeeper set in it for the line you are 
using. 
if that does not let it register, then you may try to select accept calls from unregistered 
endpoints in your conf file. 
 
regards 
ray 


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?   SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux