I'm using gnugk 2.0.6 from the latest cvs compiled just last night on
my redhat 9, we're trying to use it with the following conf:
[Gatekeeper::Auth]
RadAuth=required;RRQ,ARQ
default=allow
# Configuration section for RadAuth authenticator module
[RadAuth]
Servers=x.x.x.x
LocalInterface=x.x.x.x
RadiusPortRange=10000-11000
DefaultAuthPort=1645
SharedSecret=mysecret
RequestTimeout=2000
IdCacheTimeout=9000
SocketDeleteTimeout=60000
RequestRetransmissions=2
RoundRobinServers=1
AppendCiscoAttributes=1
IncludeTerminalAliases=1
IncludeEndpointIP=1
While trying to call say, 222-3333 (IP: 4.3.2.1) from joe's number 222-1111
(IP: 1.2.3.4) i'm getting something i consider kind of weird: in my radius
server i see the request shown far below (Service-Type=Call-Check) in a very
different way from the way i receive a Service-Type=Login-User request
which is shown just below, the big difference is that Framed-IP-Address value
is not joe's IP in both requests -which i think SHOULD be the case- on the
one regarding 'Call-Check' the IP shown is the one of the called-station!
Is this a bug? we'd like to be able to filter calls using the IP address
of the calling-station.
--
Acct-Status-Type = Start
NAS-IP-Address = n.n.n.n
NAS-Identifier = "GK02"
NAS-Port-Type = Virtual
Service-Type = Login-User
Acct-Session-Id = "b3305509"
User-Name = "joe"
Framed-IP-Address = 1.2.3.4 <--- this is OK!
Calling-Station-Id = "2221111"
Called-Station-Id = "2223333"
cisco-h323-gw-id = "h323-gw-id=GK02"
cisco-h323-conf-id = "h323-conf-id=8B073F 5D82B3 801002 A45564"
cisco-h323-call-origin = "h323-call-origin=proxy"
cisco-h323-call-type = "h323-call-type=VoIP"
cisco-h323-setup-time = "h323-setup-time=17:54:41.000 PET Wed Oct 01
2003"
cisco-h323-remote-address = "h323-remote-address=4.3.2.1"
Acct-Delay-Time = 0
--
User-Name = "joe"
CHAP-Password = <242><190>N<6><162>:@b<138>uj<28><175><208>4<180><159>
CHAP-Challenge = ?w<4><143>
NAS-IP-Address = n.n.n.n
NAS-Identifier = "GK02"
NAS-Port-Type = Virtual
Service-Type = Call-Check
Framed-IP-Address = 4.3.2.1 <-- this is the called-station, why??
Calling-Station-Id = "2221111"
Called-Station-Id = "2223333"
cisco-h323-conf-id = "h323-conf-id=8B073F 5DB9B3 801C02 A45564"
cisco-h323-call-origin = "h323-call-origin=answer"
cisco-h323-call-type = "h323-call-type=VoIP"
cisco-h323-gw-id = "h323-gw-id=GK02"
this second request triggers a denial, and the call won't take place..
thanks a lot for any enlightment on this..
Enrique-
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
