On Sat, 2005-02-19 at 08:09 -0600, Allyn Baskerville wrote: > I suspect this has been asked several times as it's happened to me a couple of times, but I didn't see the solution in the archives. > I have RH RC2 installed on an old Compaq 800 ProLiant. After the machine was built, I moved it to a rack with a KVM and a different > monitor installed. I could tell the GUI keeps trying to load but fails. I suspect the machine doesn't recognize the monitor. I tried > to change /etc/X11/XF86config, but it hasn't helped at this point. Do I need to try something else, or should this file be the > culprit? Thanks - Allyn Have you tried running this? dpkg-reconfigure xserver-xfree86 That will take you through the original install setup questions for X, then generate a new XF86config file. You might want to back up the original one before doing this. NB: This is just a guess. No promises this will fix your problem.. Cheers, Simon _______________________________________________ gnome-list mailing list gnome-list@xxxxxxxxx http://mail.gnome.org/mailman/listinfo/gnome-list
