On 06/12/2017 08:10 PM, te-yamauchi@xxxxxxxxxx wrote:
When using nfs-ganesha with GlusterFS, is it necessary to enable it with the following command? # gluster nfs-ganesha enable It is said that it is necessary to enable nfs-ganesha option when setting ganesha.enable on for volume. It is said that setting of ganesha-ha.conf is necessary, but is it necessary to set up HA to use nfs-ganesha? I would be pleased if you could tell me about HA setting example if possible. Please wait .. This will take a few minutes to complete. nfs-ganesha: failed: Failed to set up HA config for NFS - Ganesha. Please check the log file for details By the way, if you start up nfs - ganesha service without doing the above and do export setting, NFS connection is possible, but is not this an official connection method?
You may use nfs-ganesha+glusterfs without HA. You need to disable legacy gluster NFS (gnfs).
The "walk" part of my article at http://blog.gluster.org/2015/10/linux-scale-out-nfsv4-using-nfs-ganesha-and-glusterfs-one-step-at-a-time shows how to do this.
-- Kaleb _______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://lists.gluster.org/mailman/listinfo/gluster-users
