About starting nfs-ganesha

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When using nfs-ganesha with GlusterFS, is it necessary to enable it with the following command?
# gluster nfs-ganesha enable
It is said that it is necessary to enable nfs-ganesha option when setting ganesha.enable on for volume.
It is said that setting of ganesha-ha.conf is necessary, but is it necessary to set up HA to use nfs-ganesha?
I would be pleased if you could tell me about HA setting example if possible.

Please wait .. This will take a few minutes to complete.
nfs-ganesha: failed: Failed to set up HA config for NFS - Ganesha. Please check the log file for details

By the way, if you start up nfs - ganesha service without doing the above and do export setting, 
NFS connection is possible, but is not this an official connection method?

I am in trouble as nfs - ganesha does not move as I think. 
Thank you,
Tesuo
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://lists.gluster.org/mailman/listinfo/gluster-users



[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux