Re: New cluster - first experience

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I am not sure if your nics support it but you could try balance-alb (bonding mode 6), this does not require special switch support and I have had good results with it.  As Lindsey said the switch configuration could be limiting the bandwidth between nodes in balance-rr.

On 14 July 2016 at 05:21, Gandalf Corvotempesta <gandalf.corvotempesta@xxxxxxxxx> wrote:
2016-07-14 11:19 GMT+02:00, Gandalf Corvotempesta
<gandalf.corvotempesta@xxxxxxxxx>:
> Yes, but my iperf test was made with a wrong bonding configuration.

Anyway, even with direct NFS mount (not involving gluster) i'm stuck
as 60MB/s (480mbit/s)
about 50% of available bandwidth with a single nic/connection.

Any change to get this cluster faster ?
Which speed are you seeing with gluster or nfs ? I would like to
archieve the best possible speed before buying more powerful hardware
(10Gb switches)
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users

_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users

[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux