Hi Tiemen,
Have added the steps to configure HA NFS in the below doc. Please verify
if you have all the pre-requisites done & steps performed right.
https://github.com/soumyakoduri/glusterdocs/blob/ha_guide/Administrator%20Guide/Configuring%20HA%20NFS%20Server.md
Thanks,
Soumya
On 09/21/2015 09:21 PM, Tiemen Ruiten wrote:
Whoops, replied off-list.
Additionally I noticed that the generated corosync config is not valid,
as there is no interface section:
/etc/corosync/corosync.conf
totem {
version: 2
secauth: off
cluster_name: rd-ganesha-ha
transport: udpu
}
nodelist {
 node {
    ring0_addr: cobalt
    nodeid: 1
    }
 node {
    ring0_addr: iron
    nodeid: 2
    }
}
quorum {
provider: corosync_votequorum
two_node: 1
}
logging {
to_syslog: yes
}
---------- Forwarded message ----------
From: *Tiemen Ruiten* <t.ruiten@xxxxxxxxxxx <mailto:t.ruiten@xxxxxxxxxxx>>
Date: 21 September 2015 at 17:16
Subject: Re: nfs-ganesha HA with arbiter volume
To: Jiffin Tony Thottan <jthottan@xxxxxxxxxx <mailto:jthottan@xxxxxxxxxx>>
Could you point me to the latest documentation? I've been struggling to
find something up-to-date. I believe I have all the prerequisites:
- shared storage volume exists and is mounted
- all nodes in hosts files
- Gluster-NFS disabled
- corosync, pacemaker and nfs-ganesha rpm's installed
Anything I missed?
Everything has been installed by RPM so is in the default locations:
/usr/libexec/ganesha/ganesha-ha.sh
/etc/ganesha/ganesha.conf (empty)
/etc/ganesha/ganesha-ha.conf
After I started the pcsd service manually, nfs-ganesha could be enabled
successfully, but there was no virtual IP present on the interfaces and
looking at the system log, I noticed corosync failed to start:
- on the host where I issued the gluster nfs-ganesha enable command:
Sep 21 17:07:18 iron systemd: Starting NFS-Ganesha file server...
Sep 21 17:07:19 iron systemd: Started NFS-Ganesha file server.
Sep 21 17:07:19 iron rpc.statd[2409]: Received SM_UNMON_ALL request from
iron.int.rdmedia.com <http://iron.int.rdmedia.com> while not monitoring
any hosts
Sep 21 17:07:20 iron systemd: Starting Corosync Cluster Engine...
Sep 21 17:07:20 iron corosync[3426]: [MAIN Â ] Corosync Cluster Engine
('2.3.4'): started and ready to provide service.
Sep 21 17:07:20 iron corosync[3426]: [MAIN Â ] Corosync built-in
features: dbus systemd xmlconf snmp pie relro bindnow
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing transport
(UDP/IP Unicast).
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] Initializing
transmit/receive security (NSS) crypto: none hash: none
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] The network interface
[10.100.30.38] is now up.
Sep 21 17:07:20 iron corosync[3427]: [SERV Â ] Service engine loaded:
corosync configuration map access [0]
Sep 21 17:07:20 iron corosync[3427]: [QB Â Â ] server name: cmap
Sep 21 17:07:20 iron corosync[3427]: [SERV Â ] Service engine loaded:
corosync configuration service [1]
Sep 21 17:07:20 iron corosync[3427]: [QB Â Â ] server name: cfg
Sep 21 17:07:20 iron corosync[3427]: [SERV Â ] Service engine loaded:
corosync cluster closed process group service v1.01 [2]
Sep 21 17:07:20 iron corosync[3427]: [QB Â Â ] server name: cpg
Sep 21 17:07:20 iron corosync[3427]: [SERV Â ] Service engine loaded:
corosync profile loading service [4]
Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Using quorum provider
corosync_votequorum
Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:20 iron corosync[3427]: [SERV Â ] Service engine loaded:
corosync vote quorum service v1.0 [5]
Sep 21 17:07:20 iron corosync[3427]: [QB Â Â ] server name: votequorum
Sep 21 17:07:20 iron corosync[3427]: [SERV Â ] Service engine loaded:
corosync cluster quorum service v0.1 [3]
Sep 21 17:07:20 iron corosync[3427]: [QB Â Â ] server name: quorum
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member
{10.100.30.38}
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] adding new UDPU member
{10.100.30.37}
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership
(10.100.30.38:104 <http://10.100.30.38:104>) was formed. Members joined: 1
Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:20 iron corosync[3427]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:20 iron corosync[3427]: [QUORUM] Members[1]: 1
Sep 21 17:07:20 iron corosync[3427]: [MAIN Â ] Completed service
synchronization, ready to provide service.
Sep 21 17:07:20 iron corosync[3427]: [TOTEM ] A new membership
(10.100.30.37:108 <http://10.100.30.37:108>) was formed. Members joined: 1
Sep 21 17:08:21 iron corosync: Starting Corosync Cluster Engine
(corosync): [FAILED]
Sep 21 17:08:21 iron systemd: corosync.service: control process exited,
code=exited status=1
Sep 21 17:08:21 iron systemd: Failed to start Corosync Cluster Engine.
Sep 21 17:08:21 iron systemd: Unit corosync.service entered failed state.
- on the other host:
Sep 21 17:07:19 cobalt systemd: Starting Preprocess NFS configuration...
Sep 21 17:07:19 cobalt systemd: Starting RPC Port Mapper.
Sep 21 17:07:19 cobalt systemd: Reached target RPC Port Mapper.
Sep 21 17:07:19 cobalt systemd: Starting Host and Network Name Lookups.
Sep 21 17:07:19 cobalt systemd: Reached target Host and Network Name
Lookups.
Sep 21 17:07:19 cobalt systemd: Starting RPC bind service...
Sep 21 17:07:19 cobalt systemd: Started Preprocess NFS configuration.
Sep 21 17:07:19 cobalt systemd: Started RPC bind service.
Sep 21 17:07:19 cobalt systemd: Starting NFS status monitor for NFSv2/3
locking....
Sep 21 17:07:19 cobalt rpc.statd[2662]: Version 1.3.0 starting
Sep 21 17:07:19 cobalt rpc.statd[2662]: Flags: TI-RPC
Sep 21 17:07:19 cobalt systemd: Started NFS status monitor for NFSv2/3
locking..
Sep 21 17:07:19 cobalt systemd: Starting NFS-Ganesha file server...
Sep 21 17:07:19 cobalt systemd: Started NFS-Ganesha file server.
Sep 21 17:07:19 cobalt kernel: warning: `ganesha.nfsd' uses 32-bit
capabilities (legacy support in use)
Sep 21 17:07:19 cobalt logger: setting up rd-ganesha-ha
Sep 21 17:07:19 cobalt rpc.statd[2662]: Received SM_UNMON_ALL request
from cobalt.int.rdmedia.com <http://cobalt.int.rdmedia.com> while not
monitoring any hosts
Sep 21 17:07:19 cobalt logger: setting up cluster rd-ganesha-ha with the
following cobalt iron
Sep 21 17:07:20 cobalt systemd: Stopped Pacemaker High Availability
Cluster Manager.
Sep 21 17:07:20 cobalt systemd: Stopped Corosync Cluster Engine.
Sep 21 17:07:20 cobalt systemd: Reloading.
Sep 21 17:07:20 cobalt systemd:
[/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue
'RemoveOnStop' in section 'Socket'
Sep 21 17:07:20 cobalt systemd:
[/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue
'RemoveOnStop' in section 'Socket'
Sep 21 17:07:20 cobalt systemd: Reloading.
Sep 21 17:07:20 cobalt systemd:
[/usr/lib/systemd/system/dm-event.socket:10] Unknown lvalue
'RemoveOnStop' in section 'Socket'
Sep 21 17:07:20 cobalt systemd:
[/usr/lib/systemd/system/lvm2-lvmetad.socket:9] Unknown lvalue
'RemoveOnStop' in section 'Socket'
Sep 21 17:07:20 cobalt systemd: Starting Corosync Cluster Engine...
Sep 21 17:07:20 cobalt corosync[2816]: [MAIN Â ] Corosync Cluster Engine
('2.3.4'): started and ready to provide service.
Sep 21 17:07:20 cobalt corosync[2816]: [MAIN Â ] Corosync built-in
features: dbus systemd xmlconf snmp pie relro bindnow
Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing transport
(UDP/IP Unicast).
Sep 21 17:07:20 cobalt corosync[2817]: [TOTEM ] Initializing
transmit/receive security (NSS) crypto: none hash: none
Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] The network interface
[10.100.30.37] is now up.
Sep 21 17:07:21 cobalt corosync[2817]: [SERV Â ] Service engine loaded:
corosync configuration map access [0]
Sep 21 17:07:21 cobalt corosync[2817]: [QB Â Â ] server name: cmap
Sep 21 17:07:21 cobalt corosync[2817]: [SERV Â ] Service engine loaded:
corosync configuration service [1]
Sep 21 17:07:21 cobalt corosync[2817]: [QB Â Â ] server name: cfg
Sep 21 17:07:21 cobalt corosync[2817]: [SERV Â ] Service engine loaded:
corosync cluster closed process group service v1.01 [2]
Sep 21 17:07:21 cobalt corosync[2817]: [QB Â Â ] server name: cpg
Sep 21 17:07:21 cobalt corosync[2817]: [SERV Â ] Service engine loaded:
corosync profile loading service [4]
Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Using quorum provider
corosync_votequorum
Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:21 cobalt corosync[2817]: [SERV Â ] Service engine loaded:
corosync vote quorum service v1.0 [5]
Sep 21 17:07:21 cobalt corosync[2817]: [QB Â Â ] server name: votequorum
Sep 21 17:07:21 cobalt corosync[2817]: [SERV Â ] Service engine loaded:
corosync cluster quorum service v0.1 [3]
Sep 21 17:07:21 cobalt corosync[2817]: [QB Â Â ] server name: quorum
Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member
{10.100.30.37}
Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] adding new UDPU member
{10.100.30.38}
Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership
(10.100.30.37:100 <http://10.100.30.37:100>) was formed. Members joined: 1
Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1
Sep 21 17:07:21 cobalt corosync[2817]: [MAIN Â ] Completed service
synchronization, ready to provide service.
Sep 21 17:07:21 cobalt corosync[2817]: [TOTEM ] A new membership
(10.100.30.37:108 <http://10.100.30.37:108>) was formed. Members joined: 1
Sep 21 17:07:21 cobalt corosync[2817]: [VOTEQ ] Waiting for all cluster
members. Current votes: 1 expected_votes: 2
Sep 21 17:07:21 cobalt corosync[2817]: [QUORUM] Members[1]: 1
Sep 21 17:07:21 cobalt corosync[2817]: [MAIN Â ] Completed service
synchronization, ready to provide service.
Sep 21 17:08:50 cobalt systemd: corosync.service operation timed out.
Terminating.
Sep 21 17:08:50 cobalt corosync: Starting Corosync Cluster Engine
(corosync):
Sep 21 17:08:50 cobalt systemd: Failed to start Corosync Cluster Engine.
Sep 21 17:08:50 cobalt systemd: Unit corosync.service entered failed state.
Sep 21 17:08:55 cobalt logger: warning: pcs property set
no-quorum-policy=ignore failed
Sep 21 17:08:55 cobalt logger: warning: pcs property set
stonith-enabled=false failed
Sep 21 17:08:55 cobalt logger: warning: pcs resource create nfs_start
ganesha_nfsd ha_vol_mnt=/var/run/gluster/shared_storage --clone failed
Sep 21 17:08:56 cobalt logger: warning: pcs resource delete
nfs_start-clone failed
Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-mon
ganesha_mon --clone failed
Sep 21 17:08:56 cobalt logger: warning: pcs resource create nfs-grace
ganesha_grace --clone failed
Sep 21 17:08:57 cobalt logger: warning pcs resource create
cobalt-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op monitor
interval=15s failed
Sep 21 17:08:57 cobalt logger: warning: pcs resource create
cobalt-trigger_ip-1 ocf:heartbeat:Dummy failed
Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add
cobalt-cluster_ip-1 with cobalt-trigger_ip-1 failed
Sep 21 17:08:57 cobalt logger: warning: pcs constraint order
cobalt-trigger_ip-1 then nfs-grace-clone failed
Sep 21 17:08:57 cobalt logger: warning: pcs constraint order
nfs-grace-clone then cobalt-cluster_ip-1 failed
Sep 21 17:08:57 cobalt logger: warning pcs resource create
iron-cluster_ip-1 ocf:heartbeat:IPaddr ip= cidr_netmask=32 op monitor
interval=15s failed
Sep 21 17:08:57 cobalt logger: warning: pcs resource create
iron-trigger_ip-1 ocf:heartbeat:Dummy failed
Sep 21 17:08:57 cobalt logger: warning: pcs constraint colocation add
iron-cluster_ip-1 with iron-trigger_ip-1 failed
Sep 21 17:08:57 cobalt logger: warning: pcs constraint order
iron-trigger_ip-1 then nfs-grace-clone failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint order
nfs-grace-clone then iron-cluster_ip-1 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
cobalt-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
cobalt-cluster_ip-1 prefers iron=1000 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
cobalt-cluster_ip-1 prefers cobalt=2000 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
iron-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
iron-cluster_ip-1 prefers cobalt=1000 failed
Sep 21 17:08:58 cobalt logger: warning: pcs constraint location
iron-cluster_ip-1 prefers iron=2000 failed
Sep 21 17:08:58 cobalt logger: warning pcs cluster cib-push
/tmp/tmp.nXTfyA1GMR failed
Sep 21 17:08:58 cobalt logger: warning: scp ganesha-ha.conf to cobalt failed
BTW, I'm using CentOS 7. There are multiple network interfaces on the
servers, could that be a problem?Â
On 21 September 2015 at 11:48, Jiffin Tony Thottan <jthottan@xxxxxxxxxx
<mailto:jthottan@xxxxxxxxxx>> wrote:
On 21/09/15 13:56, Tiemen Ruiten wrote:
Hello Soumya, Kaleb, list,
This Friday I created the gluster_shared_storage volume manually,
I just tried it with the command you supplied, but both have the
same result:
from etc-glusterfs-glusterd.vol.log on the node where I issued the
command:
[2015-09-21 07:59:47.756845] I [MSGID: 106474]
[glusterd-ganesha.c:403:check_host_list] 0-management: ganesha
host found Hostname is cobalt
[2015-09-21 07:59:48.071755] I [MSGID: 106474]
[glusterd-ganesha.c:349:is_ganesha_host] 0-management: ganesha
host found Hostname is cobalt
[2015-09-21 07:59:48.653879] E [MSGID: 106470]
[glusterd-ganesha.c:264:glusterd_op_set_ganesha] 0-management:
Initial NFS-Ganesha set up failed
As far as what I understand from the logs, it called
setup_cluser()[calls `ganesha-ha.sh` script ] but script failed.
Can u please provide following details :
-Location of ganesha.sh file??
-Location of ganesha-ha.conf, ganesha.conf files ?
And also can u cross check whether all the prerequisites before HA
setup satisfied ?
--
With Regards,
Jiffin
[2015-09-21 07:59:48.653912] E [MSGID: 106123]
[glusterd-syncop.c:1404:gd_commit_op_phase] 0-management: Commit
of operation 'Volume (null)' failed on localhost : Failed to set
up HA config for NFS-Ganesha. Please check the log file for details
[2015-09-21 07:59:45.402458] I [MSGID: 106006]
[glusterd-svc-mgmt.c:323:glusterd_svc_common_rpc_notify]
0-management: nfs has disconnected from glusterd.
[2015-09-21 07:59:48.071578] I [MSGID: 106474]
[glusterd-ganesha.c:403:check_host_list] 0-management: ganesha
host found Hostname is cobalt
from etc-glusterfs-glusterd.vol.log on the other node:
[2015-09-21 08:12:50.111877] E [MSGID: 106062]
[glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable
to acquire volname
[2015-09-21 08:14:50.548087] E [MSGID: 106062]
[glusterd-op-sm.c:3635:glusterd_op_ac_lock] 0-management: Unable
to acquire volname
[2015-09-21 08:14:50.654746] I [MSGID: 106132]
[glusterd-proc-mgmt.c:83:glusterd_proc_stop] 0-management: nfs
already stopped
[2015-09-21 08:14:50.655095] I [MSGID: 106474]
[glusterd-ganesha.c:403:check_host_list] 0-management: ganesha
host found Hostname is cobalt
[2015-09-21 08:14:51.287156] E [MSGID: 106062]
[glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable
to acquire volname
from etc-glusterfs-glusterd.vol.log on the arbiter node:
[2015-09-21 08:18:50.934713] E [MSGID: 101075]
[common-utils.c:3127:gf_is_local_addr] 0-management: error in
getaddrinfo: Name or service not known
[2015-09-21 08:18:51.504694] E [MSGID: 106062]
[glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable
to acquire volname
I have put the hostnames of all servers in my /etc/hosts file,
including the arbiter node.
On 18 September 2015 at 16:52, Soumya Koduri <skoduri@xxxxxxxxxx
<mailto:skoduri@xxxxxxxxxx>> wrote:
Hi Tiemen,
One of the pre-requisites before setting up nfs-ganesha HA is
to create and mount shared_storage volume. Use below CLI for that
"gluster volume set all cluster.enable-shared-storage enable"
It shall create the volume and mount in all the nodes
(including the arbiter node). Note this volume shall be
mounted on all the nodes of the gluster storage pool (though
in this case it may not be part of nfs-ganesha cluster).
So instead of manually creating those directory paths, please
use above CLI and try re-configuring the setup.
Thanks,
Soumya
On 09/18/2015 07:29 PM, Tiemen Ruiten wrote:
Hello Kaleb,
I don't:
# Name of the HA cluster created.
# must be unique within the subnet
HA_NAME="rd-ganesha-ha"
#
# The gluster server from which to mount the shared data
volume.
HA_VOL_SERVER="iron"
#
# N.B. you may use short names or long names; you may not
use IP addrs.
# Once you select one, stay with it as it will be mildly
unpleasant to
# clean up if you switch later on. Ensure that all names -
short and/or
# long - are in DNS or /etc/hosts on all machines in the
cluster.
#
# The subset of nodes of the Gluster Trusted Pool that
form the ganesha
# HA cluster. Hostname is specified.
HA_CLUSTER_NODES="cobalt,iron"
#HA_CLUSTER_NODES="server1.lab.redhat.com
<http://server1.lab.redhat.com>
<http://server1.lab.redhat.com>,server2.lab.redhat.com
<http://server2.lab.redhat.com>
<http://server2.lab.redhat.com>,..."
#
# Virtual IPs for each of the nodes specified above.
VIP_server1="10.100.30.101"
VIP_server2="10.100.30.102"
#VIP_server1_lab_redhat_com="10.0.2.1"
#VIP_server2_lab_redhat_com="10.0.2.2"
hosts cobalt & iron are the data nodes, the arbiter
ip/hostname (neon)
isn't mentioned anywhere in this config file.
On 18 September 2015 at 15:56, Kaleb S. KEITHLEY
<<mailto:kkeithle@xxxxxxxxxx>kkeithle@xxxxxxxxxx
<mailto:kkeithle@xxxxxxxxxx>
<mailto:kkeithle@xxxxxxxxxx <mailto:kkeithle@xxxxxxxxxx>>>
wrote:
  On 09/18/2015 09:46 AM, Tiemen Ruiten wrote:
  > Hello,
  >
  > I have a Gluster cluster with a single replica 3,
arbiter 1 volume (so
  > two nodes with actual data, one arbiter node). I
would like to setup
  > NFS-Ganesha HA for this volume but I'm having some
difficulties.
  >
  > - I needed to create a directory
/var/run/gluster/shared_storage
  > manually on all nodes, or the command 'gluster
nfs-ganesha enable would
  > fail with the following error:
  > [2015-09-18 13:13:34.690416] E [MSGID: 106032]
  > [glusterd-ganesha.c:708:pre_setup] 0-THIS->name:
mkdir() failed on path
  > /var/run/gluster/shared_storage/nfs-ganesha, [No
such file or directory]
  >
  > - Then I found out that the command connects to
the arbiter node as
  > well, but obviously I don't want to set up
NFS-Ganesha there. Is it
  > actually possible to setup NFS-Ganesha HA with an
arbiter node? If it's
  > possible, is there any documentation on how to do
that?
  >
  Please send the /etc/ganesha/ganesha-ha.conf file
you're using.
  Probably you have included the arbiter in your HA
config; that would be
  a mistake.
  --
  Kaleb
--
Tiemen Ruiten
Systems Engineer
R&D Media
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx <mailto:Gluster-users@xxxxxxxxxxx>
http://www.gluster.org/mailman/listinfo/gluster-users
--
Tiemen Ruiten
Systems Engineer
R&D Media
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx <mailto:Gluster-users@xxxxxxxxxxx>
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx <mailto:Gluster-users@xxxxxxxxxxx>
http://www.gluster.org/mailman/listinfo/gluster-users
--
Tiemen Ruiten
Systems Engineer
R&D Media
--
Tiemen Ruiten
Systems Engineer
R&D Media
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users