Re: nfs-ganesha HA with arbiter volume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/18/2015 09:46 AM, Tiemen Ruiten wrote:
> Hello,
> 
> I have a Gluster cluster with a single replica 3, arbiter 1 volume (so
> two nodes with actual data, one arbiter node). I would like to setup
> NFS-Ganesha HA for this volume but I'm having some difficulties.
> 
> - I needed to create a directory /var/run/gluster/shared_storage
> manually on all nodes, or the command 'gluster nfs-ganesha enable would
> fail with the following error:
> [2015-09-18 13:13:34.690416] E [MSGID: 106032]
> [glusterd-ganesha.c:708:pre_setup] 0-THIS->name: mkdir() failed on path
> /var/run/gluster/shared_storage/nfs-ganesha, [No such file or directory]
> 
> - Then I found out that the command connects to the arbiter node as
> well, but obviously I don't want to set up NFS-Ganesha there. Is it
> actually possible to setup NFS-Ganesha HA with an arbiter node? If it's
> possible, is there any documentation on how to do that?
> 

Please send the /etc/ganesha/ganesha-ha.conf file you're using.

Probably you have included the arbiter in your HA config; that would be
a mistake.

-- 

Kaleb
_______________________________________________
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users



[Index of Archives]     [Gluster Development]     [Linux Filesytems Development]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux