Hello Soumya, Kaleb, list,
This Friday I created the gluster_shared_storage volume manually, I just tried it with the command you supplied, but both have the same result:
from etc-glusterfs-glusterd.vol.log on the node where I issued the command:
[2015-09-21 07:59:47.756845] I [MSGID: 106474] [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha host found Hostname is cobalt
[2015-09-21 07:59:48.071755] I [MSGID: 106474] [glusterd-ganesha.c:349:is_ganesha_host] 0-management: ganesha host found Hostname is cobalt
[2015-09-21 07:59:48.653879] E [MSGID: 106470] [glusterd-ganesha.c:264:glusterd_op_set_ganesha] 0-management: Initial NFS-Ganesha set up failed
[2015-09-21 07:59:48.653912] E [MSGID: 106123] [glusterd-syncop.c:1404:gd_commit_op_phase] 0-management: Commit of operation 'Volume (null)' failed on localhost : Failed to set up HA config for NFS-Ganesha. Please check the log file for details
[2015-09-21 07:59:45.402458] I [MSGID: 106006] [glusterd-svc-mgmt.c:323:glusterd_svc_common_rpc_notify] 0-management: nfs has disconnected from glusterd.
[2015-09-21 07:59:48.071578] I [MSGID: 106474] [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha host found Hostname is cobalt
from etc-glusterfs-glusterd.vol.log on the other node:
[2015-09-21 08:12:50.111877] E [MSGID: 106062] [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable to acquire volname
[2015-09-21 08:14:50.548087] E [MSGID: 106062] [glusterd-op-sm.c:3635:glusterd_op_ac_lock] 0-management: Unable to acquire volname
[2015-09-21 08:14:50.654746] I [MSGID: 106132] [glusterd-proc-mgmt.c:83:glusterd_proc_stop] 0-management: nfs already stopped
[2015-09-21 08:14:50.655095] I [MSGID: 106474] [glusterd-ganesha.c:403:check_host_list] 0-management: ganesha host found Hostname is cobalt
[2015-09-21 08:14:51.287156] E [MSGID: 106062] [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable to acquire volname
from etc-glusterfs-glusterd.vol.log on the arbiter node:
[2015-09-21 08:18:50.934713] E [MSGID: 101075] [common-utils.c:3127:gf_is_local_addr] 0-management: error in getaddrinfo: Name or service not known
[2015-09-21 08:18:51.504694] E [MSGID: 106062] [glusterd-op-sm.c:3698:glusterd_op_ac_unlock] 0-management: Unable to acquire volname
I have put the hostnames of all servers in my /etc/hosts file, including the arbiter node.
On 18 September 2015 at 16:52, Soumya Koduri <skoduri@xxxxxxxxxx> wrote:
Hi Tiemen,
One of the pre-requisites before setting up nfs-ganesha HA is to create and mount shared_storage volume. Use below CLI for that
"gluster volume set all cluster.enable-shared-storage enable"
It shall create the volume and mount in all the nodes (including the arbiter node). Note this volume shall be mounted on all the nodes of the gluster storage pool (though in this case it may not be part of nfs-ganesha cluster).
So instead of manually creating those directory paths, please use above CLI and try re-configuring the setup.
Thanks,
Soumya
On 09/18/2015 07:29 PM, Tiemen Ruiten wrote:
Hello Kaleb,
I don't:
# Name of the HA cluster created.
# must be unique within the subnet
HA_NAME="rd-ganesha-ha"
#
# The gluster server from which to mount the shared data volume.
HA_VOL_SERVER="iron"
#
# N.B. you may use short names or long names; you may not use IP addrs.
# Once you select one, stay with it as it will be mildly unpleasant to
# clean up if you switch later on. Ensure that all names - short and/or
# long - are in DNS or /etc/hosts on all machines in the cluster.
#
# The subset of nodes of the Gluster Trusted Pool that form the ganesha
# HA cluster. Hostname is specified.
HA_CLUSTER_NODES="cobalt,iron"
#HA_CLUSTER_NODES="server1.lab.redhat.com
<http://server1.lab.redhat.com>,server2.lab.redhat.com
<http://server2.lab.redhat.com>,..."
#
# Virtual IPs for each of the nodes specified above.
VIP_server1="10.100.30.101"
VIP_server2="10.100.30.102"
#VIP_server1_lab_redhat_com="10.0.2.1"
#VIP_server2_lab_redhat_com="10.0.2.2"
hosts cobalt & iron are the data nodes, the arbiter ip/hostname (neon)
isn't mentioned anywhere in this config file.
On 18 September 2015 at 15:56, Kaleb S. KEITHLEY <kkeithle@xxxxxxxxxx_______________________________________________<mailto:kkeithle@xxxxxxxxxx>> wrote:
On 09/18/2015 09:46 AM, Tiemen Ruiten wrote:
> Hello,
>
> I have a Gluster cluster with a single replica 3, arbiter 1 volume (so
> two nodes with actual data, one arbiter node). I would like to setup
> NFS-Ganesha HA for this volume but I'm having some difficulties.
>
> - I needed to create a directory /var/run/gluster/shared_storage
> manually on all nodes, or the command 'gluster nfs-ganesha enable would
> fail with the following error:
> [2015-09-18 13:13:34.690416] E [MSGID: 106032]
> [glusterd-ganesha.c:708:pre_setup] 0-THIS->name: mkdir() failed on path
> /var/run/gluster/shared_storage/nfs-ganesha, [No such file or directory]
>
> - Then I found out that the command connects to the arbiter node as
> well, but obviously I don't want to set up NFS-Ganesha there. Is it
> actually possible to setup NFS-Ganesha HA with an arbiter node? If it's
> possible, is there any documentation on how to do that?
>
Please send the /etc/ganesha/ganesha-ha.conf file you're using.
Probably you have included the arbiter in your HA config; that would be
a mistake.
--
Kaleb
--
Tiemen Ruiten
Systems Engineer
R&D Media
Gluster-users mailing list
Gluster-users@xxxxxxxxxxx
http://www.gluster.org/mailman/listinfo/gluster-users
Tiemen Ruiten
Systems Engineer
R&D Media
Systems Engineer
R&D Media
_______________________________________________ Gluster-users mailing list Gluster-users@xxxxxxxxxxx http://www.gluster.org/mailman/listinfo/gluster-users
