Here is your info, Peter. I shortened it because it got rejected by the server the first time. On Fri, 2004-11-12 at 14:30 -0700, Kim Lux wrote: > On Fri, 2004-11-12 at 14:21 -0500, Peter Jones wrote: > > On Fri, 2004-11-12 at 07:48 -0700, Kim Lux wrote: > > > My CDROM isn't broken. It worked perfect under FCs and it still works > > > perfect under Windows. There is a bug in FC3 final. There is nothing > > > wrong with my cdrom drive. > > > > That is yet to be determined. Could you answer the questions I asked? > > -- > > Peter > > > >Well, it'd be cdparanoia and/or kernel. What kind of drive did you say > >this was? > > It is the 4x DVD+rw CDRW that comes with an HPzd7000 laptop. > > >From syslogs: > > Nov 11 19:50:12 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 > > Nov 11 19:50:12 localhost kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, > 2048kB Cache, DMA > Nov 11 19:50:12 localhost kernel: Uniform CD-ROM driver Revision: 3.20 > > > >From kernel logs: > ide0: BM-DMA at 0x2040-0x2047, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x2048-0x204f, BIOS settings: hdc:DMA, hdd:pio > Probing IDE interface ide0... > hda: HTS548080M9AT00, ATA DISK drive > Using cfq io scheduler > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hdc: HL-DT-ST DVD+RW GCA-4040N, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > Probing IDE interface ide2... > ide2: Wait for ready failed before probe ! > Probing IDE interface ide3... > ide3: Wait for ready failed before probe ! > Probing IDE interface ide4... > ide4: Wait for ready failed before probe ! > Probing IDE interface ide5... > ide5: Wait for ready failed before probe ! > hda: max request size: 1024KiB > hda: 156301488 sectors (80026 MB) w/7877KiB Cache, CHS=16383/255/63, > UDMA(100) > hda: cache flushes supported > hda: hda1 hda2 hda3 hda4 < hda5 > > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA > Uniform CD-ROM driver Revision: 3.20 > > > And which kernel and cdparanoia versions? > > $ uname -a > Linux localhost.localdomain 2.6.9-1.667 #1 Tue Nov 2 14:41:25 EST 2004 > i686 i686 i386 GNU/Linux > > $ rpm -q cdparanoia > cdparanoia-alpha9.8-24 > > > Just to be sure I'm correct above, open a shell and do this: > > mkdir scratch > > cd scratch > > cdparanoia -B > > That should rip the CD. If it's something in either the grip code to > > get the table of contents and discid info, or something along those > > lines, it could be grip's fault. If it happens with this, that's not > > the necessarily the case. > > > First of all, I had to reboot to get the CDROM to open. After reboot, I > proceeded as follows. Note that I am NOT using ide-scsi. > > > $ cdparanoia -vB 9- > cdparanoia III release 9.8 (March 23, 2001) > (C) 2001 Monty <monty@xxxxxxxx> and Xiphophorus > > Report bugs to paranoia@xxxxxxxx > http://www.xiph.org/paranoia/ > > Checking /dev/cdrom for cdrom... > DMA scatter/gather table entries: 1 > table entry size: 131072 bytes > maximum theoretical transfer: 55 sectors > Setting default read size to 24 sectors (56448 bytes). > > > CDROM model sensed sensed: HL-DT-ST DVD+RW GCA-4040N 1.17 > > > Checking for SCSI emulation... > Drive is ATAPI (using SCSI host adaptor emulation) > > Checking for MMC style command set... > Drive is MMC style > Verifying CDDA command set... > Expected command set reads OK. > > Table of contents (audio tracks only): > track length begin copy pre ch > =========================================================== > 1. 14715 [03:16.15] 0 [00:00.00] no no 2 > 2. 18225 [04:03.00] 14715 [03:16.15] no no 2 > 3. 11472 [02:32.72] 32940 [07:19.15] no no 2 > 4. 24265 [05:23.40] 44412 [09:52.12] no no 2 > 5. 11640 [02:35.15] 68677 [15:15.52] no no 2 > 6. 15755 [03:30.05] 80317 [17:50.67] no no 2 > 7. 15493 [03:26.43] 96072 [21:20.72] no no 2 > 8. 14462 [03:12.62] 111565 [24:47.40] no no 2 > 9. 11663 [02:35.38] 126027 [28:00.27] no no 2 > 10. 14002 [03:06.52] 137690 [30:35.65] no no 2 > 11. 13533 [03:00.33] 151692 [33:42.42] no no 2 > 12. 11040 [02:27.15] 165225 [36:43.00] no no 2 > TOTAL 176265 [39:10.15] (audio only) > > Ripping from sector 126027 (track 9 [0:00.00]) > to sector 176264 (track 12 [2:27.14]) > > outputting to track09.cdda.wav > > (== PROGRESS == [ > O| 130538 00 ] == :-P O > ==) > > I killed it with a ctrl C here because my computer was hanging. > > Meanwhile, in the sys log, I am getting the following: > > Nov 12 14:05:18 localhost kernel: hdc: DMA timeout retry > Nov 12 14:05:18 localhost kernel: hdc: timeout waiting for DMA > Nov 12 14:05:23 localhost kernel: hdc: irq timeout: status=0xd0 { Busy } > Nov 12 14:05:23 localhost kernel: hdc: irq timeout: > error=0xd0LastFailedSense 0x0d > Nov 12 14:05:23 localhost kernel: hdc: ATAPI reset complete > Nov 12 14:05:31 localhost kernel: hdc: DMA timeout retry > Nov 12 14:05:31 localhost kernel: hdc: timeout waiting for DMA > Nov 12 14:05:36 localhost kernel: hdc: irq timeout: status=0xd0 { Busy } > Nov 12 14:05:36 localhost kernel: hdc: irq timeout: > error=0xd0LastFailedSense 0x0d > Nov 12 14:05:36 localhost kernel: hdc: ATAPI reset complete > Nov 12 14:05:43 localhost kernel: hdc: DMA timeout retry > Nov 12 14:05:43 localhost kernel: hdc: timeout waiting for DMA > Nov 12 14:05:48 localhost kernel: hdc: irq timeout: status=0xd0 { Busy } > Nov 12 14:05:48 localhost kernel: hdc: irq timeout: > error=0xd0LastFailedSense 0x0d <snip about 100 of these messages out> > I was, however, able to eject: > > eject -v /dev/hdc > eject: device name is `/dev/hdc' > eject: expanded name is `/dev/hdc' > eject: `/dev/hdc' is not mounted > eject: `/dev/hdc' is not a mount point > eject: `/dev/hdc' is a multipartition device > eject: trying to eject `/dev/hdc' using CD-ROM eject command > eject: CD-ROM eject command succeeded > > If I re insert the CDROM and right double click the CDROM icon on the > desktop, I get the following in and error message window: > > Error - kio_devices_mounthelper. > > /dev/hdc: Input/output error > mount: /dev/hdc already mounted or /media/cdrecorder busy > Please check that the disk is entered correctly. > > Eject still works properly after that. > > > Here is what syslog says: > > > Nov 12 14:22:37 localhost kernel: hdc: command error: status=0x51 > { DriveReady SeekComplete Error } > Nov 12 14:22:37 localhost kernel: hdc: command error: error=0x50 > Nov 12 14:22:37 localhost kernel: ide: failed opcode was 100 > Nov 12 14:22:37 localhost kernel: end_request: I/O error, dev hdc, > sector 0 > Nov 12 14:22:37 localhost kernel: Buffer I/O error on device hdc, > logical block 0 > Nov 12 14:22:37 localhost kernel: hdc: command error: status=0x51 > { DriveReady SeekComplete Error } > Nov 12 14:22:37 localhost kernel: hdc: command error: error=0x50 > Nov 12 14:22:37 localhost kernel: ide: failed opcode was 100 > Nov 12 14:22:37 localhost kernel: end_request: I/O error, dev hdc, > sector 4 <snipped about 100 of these out> > sector 68 > Nov 12 14:24:22 localhost kernel: Buffer I/O error on device hdc, > logical block 17 > Nov 12 14:24:22 localhost kernel: hdc: command error: status=0x51 > { DriveReady SeekComplete Error } > Nov 12 14:24:22 localhost kernel: hdc: command error: error=0x50 > Nov 12 14:24:22 localhost kernel: ide: failed opcode was 100 > Nov 12 14:24:22 localhost kernel: end_request: I/O error, dev hdc, > sector 0 > > > top - 14:29:28 up 18:40, 4 users, load average: 0.03, 0.10, 0.18 > Tasks: 104 total, 1 running, 103 sleeping, 0 stopped, 0 zombie > Cpu(s): 2.0% us, 0.3% sy, 0.0% ni, 97.3% id, 0.3% wa, 0.0% hi, > 0.0% si > Mem: 1034664k total, 1019128k used, 15536k free, 215208k buffers > Swap: 1020116k total, 0k used, 1020116k free, 437024k cached > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND > 3326 root 15 0 184m 35m 150m S 1.7 3.6 25:17.98 X > 9894 krlux 15 0 31152 15m 26m S 0.3 1.5 0:00.44 kdeinit > 9914 krlux 17 0 3128 960 1664 R 0.3 0.1 0:00.03 top > 1 root 16 0 3572 564 1408 S 0.0 0.1 0:00.71 init > 2 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/0 > 3 root 5 -10 0 0 0 S 0.0 0.0 0:20.43 events/0 > 4 root 5 -10 0 0 0 S 0.0 0.0 0:00.00 khelper > 5 root 5 -10 0 0 0 S 0.0 0.0 0:02.21 kacpid > 27 root 5 -10 0 0 0 S 0.0 0.0 0:00.00 kblockd/0 > 37 root 20 0 0 0 0 S 0.0 0.0 0:00.00 pdflush > 38 root 15 0 0 0 0 S 0.0 0.0 0:00.15 pdflush > 40 root 14 -10 0 0 0 S 0.0 0.0 0:00.00 aio/0 > 28 root 15 0 0 0 0 S 0.0 0.0 0:00.17 khubd > 39 root 15 0 0 0 0 S 0.0 0.0 0:00.49 kswapd0 > 113 root 25 0 0 0 0 S 0.0 0.0 0:00.00 kseriod > 190 root 15 0 0 0 0 S 0.0 0.0 0:00.60 kjournald > 1063 root 6 -10 3196 512 1340 S 0.0 0.0 0:00.10 udevd > > ps -aux > > krlux 7334 0.0 0.7 65352 7880 ? Sl 07:41 > 0:01 /usr/libexec/evol > krlux 7336 0.0 0.4 8720 4408 ? S 07:41 > 0:00 /usr/libexec/gcon > krlux 7341 0.0 0.2 7632 2648 ? Ss 07:41 > 0:00 /usr/libexec/bono > krlux 7342 0.0 1.4 29632 14964 ? S 07:41 0:00 kdeinit: > kmix -se > krlux 7344 0.0 0.7 28820 7548 ? S 07:41 0:00 kalarmd > --login > krlux 7347 0.0 0.5 78752 5412 ? Sl 07:41 > 0:00 /usr/libexec/evol > krlux 7841 0.0 1.4 29888 14788 ? S 08:22 0:00 kdeinit: > kio_uise > krlux 9507 0.1 2.8 43956 29256 ? S 12:42 0:07 kdeinit: > konquero > krlux 9609 0.4 4.6 150408 48624 ? Sl 13:03 0:23 evolution > krlux 9678 0.0 2.9 46044 30576 ? S 13:17 0:02 kdeinit: > konquero > krlux 9680 0.0 1.0 27736 10704 ? S 13:17 0:00 kdeinit: > kio_file > root 9742 0.0 0.2 6856 2088 ? S 13:53 > 0:00 /usr/libexec/gcon > krlux 9771 0.0 1.5 31552 16104 ? S 13:59 0:00 kdeinit: > konsole > krlux 9772 0.0 0.1 4952 1448 pts/2 Ss+ 13:59 0:00 /bin/bash > krlux 9826 0.0 0.6 14484 7052 ? S 14:05 > 0:00 /usr/bin/system-l > root 9827 0.0 0.1 6024 1304 ? S 14:05 > 0:00 /usr/sbin/userhel > root 9830 3.4 5.7 65888 59648 ? S 14:05 0:50 > python /usr/share > krlux 9843 0.1 2.1 38604 22296 ? S 14:22 0:00 kdeinit: > konquero > krlux 9889 0.0 0.6 14932 7040 ? S 14:24 > 0:00 /usr/bin/system-l > root 9890 0.0 0.1 5272 1308 ? S 14:24 > 0:00 /usr/sbin/userhel > root 9893 3.5 2.2 28356 23028 ? S 14:25 0:11 > python /usr/share > krlux 9894 0.8 1.5 31152 15640 ? S 14:29 0:00 kdeinit: > konsole > krlux 9895 0.0 0.1 4716 1448 pts/3 Ss 14:29 0:00 /bin/bash > krlux 9915 0.0 0.0 4304 780 pts/3 R+ 14:30 0:00 ps -aux > > > Let me know if you want more. > > -- -- Kim Lux (Mr.) Diesel Research Inc