what happens if you try to mount /dev/sr0 (manually) ? On Fri, 2004-11-05 at 13:34 -0700, Kim Lux wrote: > Do an lsusb. > > It should have been recognized as a usb2 device. > > > > On Fri, 2004-11-05 at 14:25 -0600, Thomas Cameron wrote: > > Howdy - > > > > Using FC3 RC5 updated as of today. I had to disconnect my external USB > > 2.0 HP DVD Writer in order to get FC3 installed, otherwise I got a fatal > > oops at installation time. > > > > Now that FC3 is installed, I am trying to use said DVD+RW drive. When I > > plug it in I see this: > > > > Nov 5 14:10:29 thomas kernel: usb 1-1: new high speed USB device using > > address 2 > > Nov 5 14:10:29 thomas kernel: scsi3 : SCSI emulation for USB Mass > > Storage devices > > Nov 5 14:10:29 thomas kernel: Vendor: HP Model: DVD Writer > > 200j Rev: 1.13 > > Nov 5 14:10:29 thomas kernel: Type: CD-ROM > > ANSI SCSI revision: 02 > > Nov 5 14:10:29 thomas scsi.agent[6618]: cdrom > > at /devices/pci0000:00/0000:00:1e.0/0000:04:03.2/usb1/1-1/1-1:2.0/host3/3:0:0:0 > > Nov 5 14:10:29 thomas kernel: sr0: scsi3-mmc drive: 32x/32x writer > > cd/rw xa/form2 cdda tray > > > > However, usbview, grip and XCDroast do not see the drive. It works > > flawlessly in FC2. > > > > I do see it in /proc/bus/usb/devices though: > > > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > > P: Vendor=03f0 ProdID=0507 Rev= 3.10 > > S: Manufacturer=Hewlett-Packard > > S: Product=USB Storage Adapter > > S: SerialNumber=0000000000035117 > > C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA > > I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb- > > storage > > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us > > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms > > > > Am I missing something? What do I need to do to use this drive? > > -- > > A: Because people read from top to bottom. > > Q: Why is top-posting bad? > > > > Thomas Cameron, RHCE, CNE, MCSE, MCT > > > -- > Kim Lux (Mr.) Diesel Research Inc > -- Kim Lux (Mr.) Diesel Research Inc