Do an lsusb. It should have been recognized as a usb2 device. On Fri, 2004-11-05 at 14:25 -0600, Thomas Cameron wrote: > Howdy - > > Using FC3 RC5 updated as of today. I had to disconnect my external USB > 2.0 HP DVD Writer in order to get FC3 installed, otherwise I got a fatal > oops at installation time. > > Now that FC3 is installed, I am trying to use said DVD+RW drive. When I > plug it in I see this: > > Nov 5 14:10:29 thomas kernel: usb 1-1: new high speed USB device using > address 2 > Nov 5 14:10:29 thomas kernel: scsi3 : SCSI emulation for USB Mass > Storage devices > Nov 5 14:10:29 thomas kernel: Vendor: HP Model: DVD Writer > 200j Rev: 1.13 > Nov 5 14:10:29 thomas kernel: Type: CD-ROM > ANSI SCSI revision: 02 > Nov 5 14:10:29 thomas scsi.agent[6618]: cdrom > at /devices/pci0000:00/0000:00:1e.0/0000:04:03.2/usb1/1-1/1-1:2.0/host3/3:0:0:0 > Nov 5 14:10:29 thomas kernel: sr0: scsi3-mmc drive: 32x/32x writer > cd/rw xa/form2 cdda tray > > However, usbview, grip and XCDroast do not see the drive. It works > flawlessly in FC2. > > I do see it in /proc/bus/usb/devices though: > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=03f0 ProdID=0507 Rev= 3.10 > S: Manufacturer=Hewlett-Packard > S: Product=USB Storage Adapter > S: SerialNumber=0000000000035117 > C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb- > storage > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms > > Am I missing something? What do I need to do to use this drive? > -- > A: Because people read from top to bottom. > Q: Why is top-posting bad? > > Thomas Cameron, RHCE, CNE, MCSE, MCT > -- Kim Lux (Mr.) Diesel Research Inc