I have a Wifi card that is supposed to be managed by the "network" service. The interface's IP addresses, prefixes, routes and all that get assigned correctly on boot, but the wireless parameters – mode, ESSID and channel – do not get assigned. I have to set those manually with the iwconfig command. I've had this card working before, but I've hacked the ifcfg file since then. (I've had lots of networking problems since I installed Fedora 17, so I've been editing the configuration a lot.) It's possible that I've missed something, so before I file a bug report I wanted to ask: Does anyone see anything wrong with the ifcfg file below? Björn Persson DEVICE=wifi NAME="Wifi" HWADDR=00:16:6f:a9:95:34 NM_CONTROLLED=no BOOTPROTO=none ONBOOT=yes TYPE=Wireless IPADDR0=192.168.96.1 PREFIX0=24 DEFROUTE=no IPV4_FAILURE_FATAL=yes IPV6INIT=yes IPV6_AUTOCONF=no IPV6ADDR=2002:57e3:175f:96::1/64 IPV6_DEFAULTGW=:: IPV6_DEFROUTE=no IPV6_FAILURE_FATAL=no DNS1=192.168.72.5 DOMAIN=xn--rombobjrn-67a.se. USERCTL=no ESSID=Rombo MODE=Ad-Hoc SECURITYMODE=off CHANNEL=7 RATE=auto RTS=off FRAG=off -- devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/devel
