On Di, 2010-03-09 at 07:45 -0800, Adam Williamson wrote: > On Tue, 2010-03-09 at 15:43 +0100, Stefan Schulze Frielinghaus wrote: > > Today I wanted to give F13 Alpha a test and installed it. The > > installation went fine but I do not get a proper screen resolution > > setup. The basic setup was done via system-config-display, I only added > > a modeline. But it seems to me that the modeline is ignored. Is this a > > new behavior because of kernel based mode setting or is this a bug and I > > should file a report? At the moment the screen resolution is 1024x768 > > but I expected 1280x1024. Can someone confirm this behavior? > > Can you check /var/log/Xorg.0.log , and see what that says? > > > I'm wondering because before F10 was installed, and I even did not need > > to setup a modeline. Everything was automatically configured by X.org. > > If your monitor is actually capable of 1280x1024 (*properly* capable - > if it's an LCD whose native resolution is 1024x768, this behaviour is > not a bug, it's correct), then it's certainly a bug for X not to detect > this, and you should file it: > > https://fedoraproject.org/wiki/How_to_debug_Xorg_problems The native resolution of the monitor is 1280x1024, so no problem here. I did another test and removed the /etc/X11/xorg.conf. When I'm using the DVI port, then the resolution is correctly adjusted to 1280x1024 even by KMS during boot time. But when I use the analog port, then the screen is detected as max resolution 1024x768. Disabling KMS via nomodeset did not help. I guess this is really a bug and opened one. For references: https://bugzilla.redhat.com/show_bug.cgi?id=571850 -- devel mailing list devel@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/devel
