> Wiadomość napisana przez Damon Ding <damon.ding@xxxxxxxxxxxxxx> w dniu 23 sty 2025, o godz. 11:07: > > Picked from: > https://patchwork.kernel.org/project/linux-rockchip/list/?series=923593 > > These patchs have been tested with a 1536x2048p60 eDP panel on > RK3588S EVB1 board, and HDMI 1080P/4K display also has been verified > on RK3588 EVB1 board. Furthermore, the eDP display has been rechecked > on RK3399 sapphire excavator board. > > Patch 1~4 are preparations for the RK3588 eDP support on both Analogix > side and Rockchip side. > Patch 5~8 are to support to get panel from the DP AUX bus. > Patch 9~11 are the RK3588 Analogix DP driver support. > Patch 12 is to add the power sequencing delays for panel model > LP079QX1-SP0V. > Patch 13 is the addition of RK3588 eDP0 node. > Patch 14 is to enable the eDP0 display on RK3588S EVB1 board. > > Damon Ding (14): > drm/rockchip: analogix_dp: Replace DRM_...() functions with drm_...() > drm/rockchip: analogix_dp: Use formalized struct definition for grf > field > drm/rockchip: analogix_dp: Expand device data to support multiple edp > display > drm/bridge: analogix_dp: Add support for phy configuration. > dt-bindings: display: rockchip: analogix-dp: Add support to get panel > from the DP AUX bus > drm/bridge: analogix_dp: support to get &analogix_dp_device.plat_data > and &analogix_dp_device.aux > drm/bridge: analogix_dp: Add support to get panel from the DP AUX bus > drm/rockchip: analogix_dp: Add support to get panel from the DP AUX > bus > dt-bindings: display: rockchip: analogix-dp: Add support for RK3588 > drm/bridge: analogix_dp: Add support for RK3588 > drm/rockchip: analogix_dp: Add support for RK3588 > drm/edp-panel: Add LG Display panel model LP079QX1-SP0V > arm64: dts: rockchip: Add eDP0 node for RK3588 > arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board > > .../rockchip/rockchip,analogix-dp.yaml | 25 +- > arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 28 +++ > .../boot/dts/rockchip/rk3588s-evb1-v10.dts | 54 ++++ > .../drm/bridge/analogix/analogix_dp_core.c | 76 +++--- > .../drm/bridge/analogix/analogix_dp_core.h | 1 + > .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 52 ++++ > drivers/gpu/drm/panel/panel-edp.c | 8 + > .../gpu/drm/rockchip/analogix_dp-rockchip.c | 238 +++++++++++++----- > include/drm/bridge/analogix_dp.h | 8 +- > 9 files changed, 401 insertions(+), 89 deletions(-) > > -- > 2.34.1 > Damon, I’m playing with hdmi0 port enablement on radxa rock5 itx board with 6.14 mainline. rock5 itx has 2 hdmi ports: hdmi0 is wired to rk3588 typeC1/eDP1 eDP with ra620 eDP->HDMI converter and hdmi1 from hdmi/edp tx1 (see page3 & page29 at https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf) I’m on 6.14-rc2 with applied: [1] Cristicc hdmi code (https://gitlab.collabora.com/cristicc/linux-next/-/commits/rk3588-hdmi-bridge) [2] eDP support for RK3588 (https://patchwork.kernel.org/project/linux-rockchip/list/?series=927765) [3] Add eDP mode support for Rockchip Samsung HDPTX PHY (https://patchwork.kernel.org/project/linux-rockchip/cover/20250205105157.580060-1-damon.ding@xxxxxxxxxxxxxx/) Is edp1 supported by yours [2] series? If yes - may you pls hint me about required dts additions in https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts?h=v6.14-rc2 ? (for reference: rock5 itx bsp dts goes like this: https://github.com/radxa/kernel/blob/linux-6.1-stan-rkr1/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts) in [2] i see dts adds for EVB1 - but i’m not sure will simple extrapolation of evb1 edp0 dts additions to edp1 in rock5 be enough…. thx in advance!
