i.MX8qxp Display Controller has a built-in interrupt controller to support Enable/Status/Preset/Clear interrupt bit. Signed-off-by: Liu Ying <victor.liu@xxxxxxx> Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx> --- v6: * No change. v5: * No change. v4: * No change. v3: * Collect Rob's R-b tag. v2: * Drop unneeded "|". (Krzysztof) .../fsl,imx8qxp-dc-intc.yaml | 318 ++++++++++++++++++ 1 file changed, 318 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml new file mode 100644 index 000000000000..6985ee644a25 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml @@ -0,0 +1,318 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,imx8qxp-dc-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller interrupt controller + +description: | + The Display Controller has a built-in interrupt controller with the following + features for all relevant HW events: + + * Enable bit (mask) + * Status bit (set by an HW event) + * Preset bit (can be used by SW to set status) + * Clear bit (used by SW to reset the status) + + Each interrupt can be connected as IRQ (maskable) and/or NMI (non-maskable). + Alternatively the un-masked trigger signals for all HW events are provided, + allowing it to use a global interrupt controller instead. + + Each interrupt can be protected against SW running in user mode. In that case, + only privileged AHB access can control the interrupt status. + +maintainers: + - Liu Ying <victor.liu@xxxxxxx> + +properties: + compatible: + const: fsl,imx8qxp-dc-intc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + interrupts: + items: + - description: store9 shadow load interrupt(blit engine) + - description: store9 frame complete interrupt(blit engine) + - description: store9 sequence complete interrupt(blit engine) + - description: + extdst0 shadow load interrupt + (display controller, content stream 0) + - description: + extdst0 frame complete interrupt + (display controller, content stream 0) + - description: + extdst0 sequence complete interrupt + (display controller, content stream 0) + - description: + extdst4 shadow load interrupt + (display controller, safety stream 0) + - description: + extdst4 frame complete interrupt + (display controller, safety stream 0) + - description: + extdst4 sequence complete interrupt + (display controller, safety stream 0) + - description: + extdst1 shadow load interrupt + (display controller, content stream 1) + - description: + extdst1 frame complete interrupt + (display controller, content stream 1) + - description: + extdst1 sequence complete interrupt + (display controller, content stream 1) + - description: + extdst5 shadow load interrupt + (display controller, safety stream 1) + - description: + extdst5 frame complete interrupt + (display controller, safety stream 1) + - description: + extdst5 sequence complete interrupt + (display controller, safety stream 1) + - description: + disengcfg0 shadow load interrupt + (display controller, display stream 0) + - description: + disengcfg0 frame complete interrupt + (display controller, display stream 0) + - description: + disengcfg0 sequence complete interrupt + (display controller, display stream 0) + - description: + framegen0 programmable interrupt0 + (display controller, display stream 0) + - description: + framegen0 programmable interrupt1 + (display controller, display stream 0) + - description: + framegen0 programmable interrupt2 + (display controller, display stream 0) + - description: + framegen0 programmable interrupt3 + (display controller, display stream 0) + - description: + signature0 shadow load interrupt + (display controller, display stream 0) + - description: + signature0 measurement valid interrupt + (display controller, display stream 0) + - description: + signature0 error condition interrupt + (display controller, display stream 0) + - description: + disengcfg1 shadow load interrupt + (display controller, display stream 1) + - description: + disengcfg1 frame complete interrupt + (display controller, display stream 1) + - description: + disengcfg1 sequence complete interrupt + (display controller, display stream 1) + - description: + framegen1 programmable interrupt0 + (display controller, display stream 1) + - description: + framegen1 programmable interrupt1 + (display controller, display stream 1) + - description: + framegen1 programmable interrupt2 + (display controller, display stream 1) + - description: + framegen1 programmable interrupt3 + (display controller, display stream 1) + - description: + signature1 shadow load interrupt + (display controller, display stream 1) + - description: + signature1 measurement valid interrupt + (display controller, display stream 1) + - description: + signature1 error condition interrupt + (display controller, display stream 1) + - description: reserved + - description: + command sequencer error condition interrupt(command sequencer) + - description: + common control software interrupt0(common control) + - description: + common control software interrupt1(common control) + - description: + common control software interrupt2(common control) + - description: + common control software interrupt3(common control) + - description: + framegen0 synchronization status activated interrupt + (display controller, safety stream 0) + - description: + framegen0 synchronization status deactivated interrupt + (display controller, safety stream 0) + - description: + framegen0 synchronization status activated interrupt + (display controller, content stream 0) + - description: + framegen0 synchronization status deactivated interrupt + (display controller, content stream 0) + - description: + framegen1 synchronization status activated interrupt + (display controller, safety stream 1) + - description: + framegen1 synchronization status deactivated interrupt + (display controller, safety stream 1) + - description: + framegen1 synchronization status activated interrupt + (display controller, content stream 1) + - description: + framegen1 synchronization status deactivated interrupt + (display controller, content stream 1) + minItems: 49 + + interrupt-names: + items: + - const: store9_shdload + - const: store9_framecomplete + - const: store9_seqcomplete + - const: extdst0_shdload + - const: extdst0_framecomplete + - const: extdst0_seqcomplete + - const: extdst4_shdload + - const: extdst4_framecomplete + - const: extdst4_seqcomplete + - const: extdst1_shdload + - const: extdst1_framecomplete + - const: extdst1_seqcomplete + - const: extdst5_shdload + - const: extdst5_framecomplete + - const: extdst5_seqcomplete + - const: disengcfg_shdload0 + - const: disengcfg_framecomplete0 + - const: disengcfg_seqcomplete0 + - const: framegen0_int0 + - const: framegen0_int1 + - const: framegen0_int2 + - const: framegen0_int3 + - const: sig0_shdload + - const: sig0_valid + - const: sig0_error + - const: disengcfg_shdload1 + - const: disengcfg_framecomplete1 + - const: disengcfg_seqcomplete1 + - const: framegen1_int0 + - const: framegen1_int1 + - const: framegen1_int2 + - const: framegen1_int3 + - const: sig1_shdload + - const: sig1_valid + - const: sig1_error + - const: reserved + - const: cmdseq_error + - const: comctrl_sw0 + - const: comctrl_sw1 + - const: comctrl_sw2 + - const: comctrl_sw3 + - const: framegen0_primsync_on + - const: framegen0_primsync_off + - const: framegen0_secsync_on + - const: framegen0_secsync_off + - const: framegen1_primsync_on + - const: framegen1_primsync_off + - const: framegen1_secsync_on + - const: framegen1_secsync_off + minItems: 49 + +required: + - compatible + - reg + - clocks + - interrupt-controller + - "#interrupt-cells" + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + + interrupt-controller@56180040 { + compatible = "fsl,imx8qxp-dc-intc"; + reg = <0x56180040 0x60>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + interrupt-controller; + interrupt-parent = <&dc0_irqsteer>; + #interrupt-cells = <1>; + interrupts = <448>, <449>, <450>, <64>, + <65>, <66>, <67>, <68>, + <69>, <70>, <193>, <194>, + <195>, <196>, <197>, <72>, + <73>, <74>, <75>, <76>, + <77>, <78>, <79>, <80>, + <81>, <199>, <200>, <201>, + <202>, <203>, <204>, <205>, + <206>, <207>, <208>, <5>, + <0>, <1>, <2>, <3>, + <4>, <82>, <83>, <84>, + <85>, <209>, <210>, <211>, + <212>; + interrupt-names = "store9_shdload", + "store9_framecomplete", + "store9_seqcomplete", + "extdst0_shdload", + "extdst0_framecomplete", + "extdst0_seqcomplete", + "extdst4_shdload", + "extdst4_framecomplete", + "extdst4_seqcomplete", + "extdst1_shdload", + "extdst1_framecomplete", + "extdst1_seqcomplete", + "extdst5_shdload", + "extdst5_framecomplete", + "extdst5_seqcomplete", + "disengcfg_shdload0", + "disengcfg_framecomplete0", + "disengcfg_seqcomplete0", + "framegen0_int0", + "framegen0_int1", + "framegen0_int2", + "framegen0_int3", + "sig0_shdload", + "sig0_valid", + "sig0_error", + "disengcfg_shdload1", + "disengcfg_framecomplete1", + "disengcfg_seqcomplete1", + "framegen1_int0", + "framegen1_int1", + "framegen1_int2", + "framegen1_int3", + "sig1_shdload", + "sig1_valid", + "sig1_error", + "reserved", + "cmdseq_error", + "comctrl_sw0", + "comctrl_sw1", + "comctrl_sw2", + "comctrl_sw3", + "framegen0_primsync_on", + "framegen0_primsync_off", + "framegen0_secsync_on", + "framegen0_secsync_off", + "framegen1_primsync_on", + "framegen1_primsync_off", + "framegen1_secsync_on", + "framegen1_secsync_off"; + }; -- 2.34.1
