i.MX8qxp Display Controller contains a command sequencer is designed to autonomously process command lists. Signed-off-by: Liu Ying <victor.liu@xxxxxxx> --- v6: * No change. v5: * No change. v4: * Replace "fsl,iram" property with standard "sram" property. (Rob) v3: * New patch. (Rob) .../imx/fsl,imx8qxp-dc-command-sequencer.yaml | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml new file mode 100644 index 000000000000..27118f4c0d28 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Command Sequencer + +description: | + The Command Sequencer is designed to autonomously process command lists. + By that it can load setups into the DC configuration and synchronize to + hardware events. This releases a system's CPU from workload, because it + does not need to wait for certain events. Also it simplifies SW architecture, + because no interrupt handlers are required. Setups are read via AXI bus, + while write access to configuration registers occurs directly via an internal + bus. This saves bandwidth for the AXI interconnect and improves the system + architecture in terms of safety aspects. + +maintainers: + - Liu Ying <victor.liu@xxxxxxx> + +properties: + compatible: + const: fsl,imx8qxp-dc-command-sequencer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 5 + + interrupt-names: + items: + - const: error + - const: sw0 + - const: sw1 + - const: sw2 + - const: sw3 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle pointing to the mmio-sram device node + +required: + - compatible + - reg + - clocks + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + + command-sequencer@56180400 { + compatible = "fsl,imx8qxp-dc-command-sequencer"; + reg = <0x56180400 0x1a4>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + interrupt-parent = <&dc0_intc>; + interrupts = <36>, <37>, <38>, <39>, <40>; + interrupt-names = "error", "sw0", "sw1", "sw2", "sw3"; + }; -- 2.34.1
