Hi all, this is a v3, which has only a minor change in a second patch. The LVDS differential voltage swing can be specified as arrays of min, max in microvolts. Two arrays, one for data-lanes and one for clock-lane can be specified. Additionally, because LVDS voltage swing depends on near-end termination this can now also be specified with separate property. Driver goes through the tables, taken from datasheet [1] and selects the appropriate configuration. If appropriate configuration can not be found the probe fails. If these properties are not defined default values are used as before. This patch series depends on the patch "[PATCH v2 11/15] arm64: dts: imx8mm-phyboard-polis: Add support for PEB-AV-10" (https://lore.kernel.org/all/20241202072052.2195283-12-andrej.picej@xxxxxxxxx/) which is currently under review. Please apply the dependent series first before applying this one. v1 is at: https://lore.kernel.org/all/20241127103031.1007893-1-andrej.picej@xxxxxxxxx/ v2 is at: https://lore.kernel.org/all/20241203085822.2475138-1-andrej.picej@xxxxxxxxx/ [1] https://www.ti.com/lit/ds/symlink/sn65dsi83.pdf?ts=1732738773429&ref_url=https%253A%252F%252Fwww.mouser.co.uk%252F Best regards, Andrej Andrej Picej (3): dt-bindings: drm/bridge: ti-sn65dsi83: Add properties for ti,lvds-vod-swing drm/bridge: ti-sn65dsi83: Add ti,lvds-vod-swing optional properties arm64: dts: imx8mm-phyboard-polis-peb-av-10: Set lvds-vod-swing .../bindings/display/bridge/ti,sn65dsi83.yaml | 36 ++++- .../imx8mm-phyboard-polis-peb-av-10.dtso | 2 + drivers/gpu/drm/bridge/ti-sn65dsi83.c | 144 +++++++++++++++++- 3 files changed, 176 insertions(+), 6 deletions(-) -- 2.34.1
