Hi,
On Tue, Nov 26, 2024 at 09:38:55AM +0100, Maxime Ripard wrote:
> Hi,
>
> On Tue, Nov 26, 2024 at 08:36:00AM +0100, Sean Nyekjaer wrote:
> > On Mon, Nov 25, 2024 at 05:00:56PM +0100, Maxime Ripard wrote:
> > > On Mon, Nov 25, 2024 at 02:49:26PM +0100, Sean Nyekjaer wrote:
> > > > Check if the required pixel clock is in within .5% range of the
> > > > desired pixel clock.
> > > > This will match the requirement for HDMI where a .5% tolerance is allowed.
> > > >
> > > > Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx>
> > > > ---
> > > > drivers/gpu/drm/drm_modes.c | 34 ++++++++++++++++++++++++++++++++++
> > > > include/drm/drm_modes.h | 2 ++
> > > > 2 files changed, 36 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > > index 6ba167a3346134072d100af0adbbe9b49e970769..4068b904759bf80502efde6e4d977b297f5d5359 100644
> > > > --- a/drivers/gpu/drm/drm_modes.c
> > > > +++ b/drivers/gpu/drm/drm_modes.c
> > > > @@ -1623,6 +1623,40 @@ bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
> > > > }
> > > > EXPORT_SYMBOL(drm_mode_equal_no_clocks_no_stereo);
> > > >
> > > > +/**
> > > > + * drm_mode_validate_mode
> > > > + * @mode: mode to check
> > > > + * @rounded_rate: output pixel clock
> > > > + *
> > > > + * VESA DMT defines a tolerance of 0.5% on the pixel clock, while the
> > > > + * CVT spec reuses that tolerance in its examples, so it looks to be a
> > > > + * good default tolerance for the EDID-based modes. Define it to 5 per
> > > > + * mille to avoid floating point operations.
> > > > + *
> > > > + * Returns:
> > > > + * The mode status
> > > > + */
> > > > +enum drm_mode_status drm_mode_validate_mode(const struct drm_display_mode *mode,
> > > > + unsigned long long rounded_rate)
> > > > +{
> > > > + enum drm_mode_status status;
> > > > + unsigned long long rate = mode->clock * 1000;
> > > > + unsigned long long lowest, highest;
> > > > +
> > > > + lowest = rate * (1000 - 5);
> > > > + do_div(lowest, 1000);
> > > > + if (rounded_rate < lowest)
> > > > + return MODE_CLOCK_LOW;
> > > > +
> > > > + highest = rate * (1000 + 5);
> > > > + do_div(highest, 1000);
> > > > + if (rounded_rate > highest)
> > > > + return MODE_CLOCK_HIGH;
> > > > +
> > > > + return MODE_OK;
> > > > +}
> > > > +EXPORT_SYMBOL(drm_mode_validate_mode);
> > >
> > > Thanks a lot for doing that!
> > >
> > > I wonder about the naming though (and prototype). I doesn't really
> > > validates a mode, but rather makes sure that a given rate is a good
> > > approximation of a pixel clock. So maybe something like
> > > drm_mode_check_pixel_clock?
> >
> > Naming is hard :) I will use drm_mode_check_pixel_clock() for V2.
> >
> > Would it make sense to have the pixel clock requirement as a input
> > parameter? For HDMI it is 0.5%
>
> This code was only used for panels so far. It reuses the same tolerance
> than HDMI because we couldn't come up with anything better, but it
> should totally apply to other things.
>
> > and in my case the LVDS panel 10%.
>
> 10% is a lot, and I'm not sure we'll want that. The framerate being
> anywhere between 54 and 66 fps will trip a lot of applications too.
>
> Why do you need such a big tolerance?
I don't need it, it was just from the datasheet for the LVDS panel :)
>
> Maxime
/Sean
