On Fri, Nov 15, 2024 at 01:55:13PM +0100, Stephan Gerhold wrote:
> The IRQ indexes for the intf_6 underrun/vsync interrupts are swapped.
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16) is the actual underrun interrupt and
> DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17) is the vsync interrupt.
>
> This causes timeout errors when using the DP2 controller, e.g.
> [dpu error]enc37 frame done timeout
> *ERROR* irq timeout id=37, intf_mode=INTF_MODE_VIDEO intf=6 wb=-1, pp=2, intr=0
> *ERROR* wait disable failed: id:37 intf:6 ret:-110
>
> Correct them to fix these errors and make DP2 work properly.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: e3b1f369db5a ("drm/msm/dpu: Add X1E80100 support")
> Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
This fixes the errors I was seeing with the third usb-c port on the
x1e80100 CRD:
Tested-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
Johan
