On 18.10.2024 12:08 PM, Dmitry Baryshkov wrote: > On Fri, Oct 18, 2024 at 12:37:01PM +0530, Soutrik Mukhopadhyay wrote: >> This series adds support for the DisplayPort controller >> and eDP PHY v5 found on the Qualcomm SA8775P platform. >> >> --- >> v2: Fixed review comments from Dmitry and Bjorn >> - Made aux_cfg array as const. >> - Reused edp_swing_hbr_rbr and edp_swing_hbr2_hbr3 for v5. >> >> v3: Fixed review comments from Dmitry, Konrad and Bjorn >> - Used a for loop to write the dp_phy_aux_cfg registers. >> - Pre-defined the aux_cfg size to prevent any magic numbers. >> - Added all the necessary DPTX controllers for this platform. >> >> v4: Fixed review comments from Dmitry and Krzysztof >> - Removed the "reviewed by" and kept only the "acked by" for >> patch 1. >> - Updated the commit message of patch 5 to mention specifically >> about the validation of "only" MDSS0 DPTX0 and DPTX1. >> >> v5: Fixed review comment from Dmitry in patch 5 >> - Aligned the register starting address for display port as part >> of device description with respect to other targets. >> >> Below patches are applied: >> >> [1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p >> commit: 7adb3d221a4d6a4f5e0793c3bd35f1168934035c >> [2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings >> commit: 913463587d528d766a8e12c7790995e273ec84fb >> [3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P >> commit: 3f12bf16213c30d8e645027efd94a19c13ee0253 > > Please in future skip applied patches instead of including them into the > series. No need to resend the series just for this issue though. (you would normally do this by rebasing your tree against -next and having git rebase-skip the ones already present) Konrad
