This series adds support for the DisplayPort controller
and eDP PHY v5 found on the Qualcomm SA8775P platform.
---
v2: Fixed review comments from Dmitry and Bjorn
- Made aux_cfg array as const.
- Reused edp_swing_hbr_rbr and edp_swing_hbr2_hbr3 for v5.
v3: Fixed review comments from Dmitry, Konrad and Bjorn
- Used a for loop to write the dp_phy_aux_cfg registers.
- Pre-defined the aux_cfg size to prevent any magic numbers.
- Added all the necessary DPTX controllers for this platform.
v4: Fixed review comments from Dmitry and Krzysztof
- Removed the "reviewed by" and kept only the "acked by" for
patch 1.
- Updated the commit message of patch 5 to mention specifically
about the validation of "only" MDSS0 DPTX0 and DPTX1.
v5: Fixed review comment from Dmitry in patch 5
- Aligned the register starting address for display port as part
of device description with respect to other targets.
Below patches are applied:
[1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p
commit: 7adb3d221a4d6a4f5e0793c3bd35f1168934035c
[2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings
commit: 913463587d528d766a8e12c7790995e273ec84fb
[3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P
commit: 3f12bf16213c30d8e645027efd94a19c13ee0253
---
Soutrik Mukhopadhyay (5):
dt-bindings: phy: Add eDP PHY compatible for sa8775p
phy: qcom: edp: Introduce aux_cfg array for version specific aux
settings
phy: qcom: edp: Add support for eDP PHY on SA8775P
dt-bindings: display: msm: dp-controller: document SA8775P compatible
drm/msm/dp: Add DisplayPort controller for SA8775P
.../bindings/display/msm/dp-controller.yaml | 1 +
.../devicetree/bindings/phy/qcom,edp-phy.yaml | 1 +
drivers/gpu/drm/msm/dp/dp_display.c | 9 +++
drivers/phy/qualcomm/phy-qcom-edp.c | 74 +++++++++++++------
4 files changed, 61 insertions(+), 24 deletions(-)
--
2.17.1
