On 10/18/24 11:00 AM, Liu Ying wrote:
On 10/18/2024, Marek Vasut wrote:
On 10/18/24 8:48 AM, Liu Ying wrote:
Add a HDMI connector to connect with i.MX8MP HDMI TX output.
This is a preparation for making the i.MX8MP LCDIF driver use
drm_bridge_connector which requires the DRM_BRIDGE_ATTACH_NO_CONNECTOR
flag. With that flag, the DW HDMI bridge core driver would
try to attach the next bridge which is the HDMI connector.
Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
---
.../dts/freescale/imx8mp-msc-sm2s-ep1.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index 83194ea7cb81..b776646a258a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -15,6 +15,17 @@ / {
"avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
"fsl,imx8mp";
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
Shouldn't this also have a 'label' property ?
'label' property is not required by hdmi-connector.yaml and there
are in-tree hdmi-connector nodes that haven't got it.
I tried to find schematics for the board online, but failed.
I don't have the board to see the label printed in silk layer, either.
If anyone can provide a valid label name, I may add it.
For the Kontron board, Frieder might be able to look it up for you ?
For the MSC one, hmmm, I am not sure. Anyone ?
