On Wed, 2024-10-09 at 00:38 +0200, Marek Vasut wrote:
> The LDB serializer clock operate at either x7 or x14 rate of the
> input
> LCDIFv3 scanout engine clock. Make sure the serializer clock and
> their
> upstream Video PLL are configured early in .mode_set to the x7 or x14
> rate of pixel clock, before LCDIFv3 .atomic_enable is called which
> would
> configure the Video PLL to low x1 rate, which is unusable.
>
> With this patch in place, the clock tree is correctly configured. The
> example below is for a 71.1 MHz pixel clock panel, the LDB serializer
> clock is then 497.7 MHz:
Awesome! Thank you for this, this seems to fix the regression and the
patches work as expected. I have tested both patches on v6.12-rc2 and
the display works well.
For both patches,
Tested-by: Isaac Scott <isaac.scott@xxxxxxxxxxxxxxxx>
>
> video_pll1_ref_sel 1 1 0 24000000 0 0 50000
> video_pll1 1 1 0 497700000 0 0 50000
> video_pll1_bypass 1 1 0 497700000 0 0 50000
> video_pll1_out 2 2 0 497700000 0 0 50000
> media_ldb 1 1 0 497700000 0 0 50000
> media_ldb_root_clk 1 1 0 497700000 0 0 50000
> media_disp2_pix 1 1 0 71100000 0 0 50000
> media_disp2_pix_root_clk 1 1 0 71100000 0 0 50000
>
> Signed-off-by: Marek Vasut <marex@xxxxxxx>
> ---
> Cc: Abel Vesa <abelvesa@xxxxxxxxxx>
> Cc: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
> Cc: David Airlie <airlied@xxxxxxxxx>
> Cc: Fabio Estevam <festevam@xxxxxxxxx>
> Cc: Isaac Scott <isaac.scott@xxxxxxxxxxxxxxxx>
> Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
> Cc: Jonas Karlman <jonas@xxxxxxxxx>
> Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> Cc: Maxime Ripard <mripard@xxxxxxxxxx>
> Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
> Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> Cc: Peng Fan <peng.fan@xxxxxxx>
> Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
> Cc: Robert Foss <rfoss@xxxxxxxxxx>
> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> Cc: Simona Vetter <simona@xxxxxxxx>
> Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
> Cc: Thomas Zimmermann <tzimmermann@xxxxxxx>
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> Cc: imx@xxxxxxxxxxxxxxx
> Cc: kernel@xxxxxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-clk@xxxxxxxxxxxxxxx
> ---
> drivers/gpu/drm/bridge/fsl-ldb.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/fsl-ldb.c
> b/drivers/gpu/drm/bridge/fsl-ldb.c
> index 0e4bac7dd04ff..a3a31467fcc85 100644
> --- a/drivers/gpu/drm/bridge/fsl-ldb.c
> +++ b/drivers/gpu/drm/bridge/fsl-ldb.c
> @@ -278,6 +278,16 @@ fsl_ldb_mode_valid(struct drm_bridge *bridge,
> return MODE_OK;
> }
>
> +static void fsl_ldb_mode_set(struct drm_bridge *bridge,
> + const struct drm_display_mode *mode,
> + const struct drm_display_mode *adj)
> +{
> + struct fsl_ldb *fsl_ldb = to_fsl_ldb(bridge);
> + unsigned long requested_link_freq =
> fsl_ldb_link_frequency(fsl_ldb, mode->clock);
> +
> + clk_set_rate(fsl_ldb->clk, requested_link_freq);
> +}
> +
> static const struct drm_bridge_funcs funcs = {
> .attach = fsl_ldb_attach,
> .atomic_enable = fsl_ldb_atomic_enable,
> @@ -287,6 +297,7 @@ static const struct drm_bridge_funcs funcs = {
> .atomic_get_input_bus_fmts =
> fsl_ldb_atomic_get_input_bus_fmts,
> .atomic_reset = drm_atomic_helper_bridge_reset,
> .mode_valid = fsl_ldb_mode_valid,
> + .mode_set = fsl_ldb_mode_set,
> };
>
> static int fsl_ldb_probe(struct platform_device *pdev)
