On 08.10.24 11:04 AM, Shawn Guo wrote: > On Tue, Oct 08, 2024 at 09:21:05AM +0200, Frieder Schrempf wrote: >> On 28.08.24 9:46 AM, Frieder Schrempf wrote: >>> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> >>> >>> This add support for the display bridges (DSI->LVDS and DSI->HDMI) >>> on the BL i.MX8MM and the 7" LVDS panel in a separate overlay. >>> >>> Only one of the interfaces (HDMI or LVDS) is supported at the same >>> time. Enabling the LVDS overlay will disable the HDMI interface. >>> >>> * Patch 1 and 2: Add the necessary binding changes >>> * Patch 3: Extend the BL devicetree >>> * Patch 4: Add the LVDS panel overlay >>> >>> Changes for v2: >>> * Patch 1: Add link to commit message >>> * Patch 2: Add Conors A-b tag >>> * Patch 3: Remove blank lines from hdmi node >>> * Patch 3: Fix order of lvds and hdmi nodes within i2c >>> * Patch 3: Remove the unneeded deletion of samsung,pll-clock-frequency >>> * Patch 3: Use the existing MIPI DSI output port from imx8mm.dtsi >>> * Patch 4: Update copyright year >>> * Patch 4: Use exisitng MIPI DSI output port from imx8mm.dtsi >>> * Patch 4: Fix pinctrl for GPIO hogs >>> * Patch 4: Fix property order in i2c2 node >>> * Patch 4: Use generic node name for touchscreen >>> >>> Frieder Schrempf (4): >>> dt-bindings: vendor-prefixes: Add Jenson Display >>> dt-bindings: display: panel-lvds: Add compatible for Jenson >>> BL-JT60050-01A >>> arm64: dts: imx8mm-kontron: Add support for display bridges on BL >>> i.MX8MM >>> arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS >>> support >> >> Gentle ping for this series. Neil proposed to apply path 1 and 2 to >> drm-misc-next. Shawn, can you review/apply patch 3 and 4, please? > > I'm getting this: > > OVL arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtb > Failed to apply 'arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtbo': FDT_ERR_NOTFOUND > make[4]: *** [../scripts/Makefile.dtbs:83: arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtb] Error 1 Thanks for noticing. It seems like I missed to commit something before preparing the patches. I just sent out a v3 that is fixed.
