On 28.08.24 9:46 AM, Frieder Schrempf wrote: > From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> > > This add support for the display bridges (DSI->LVDS and DSI->HDMI) > on the BL i.MX8MM and the 7" LVDS panel in a separate overlay. > > Only one of the interfaces (HDMI or LVDS) is supported at the same > time. Enabling the LVDS overlay will disable the HDMI interface. > > * Patch 1 and 2: Add the necessary binding changes > * Patch 3: Extend the BL devicetree > * Patch 4: Add the LVDS panel overlay > > Changes for v2: > * Patch 1: Add link to commit message > * Patch 2: Add Conors A-b tag > * Patch 3: Remove blank lines from hdmi node > * Patch 3: Fix order of lvds and hdmi nodes within i2c > * Patch 3: Remove the unneeded deletion of samsung,pll-clock-frequency > * Patch 3: Use the existing MIPI DSI output port from imx8mm.dtsi > * Patch 4: Update copyright year > * Patch 4: Use exisitng MIPI DSI output port from imx8mm.dtsi > * Patch 4: Fix pinctrl for GPIO hogs > * Patch 4: Fix property order in i2c2 node > * Patch 4: Use generic node name for touchscreen > > Frieder Schrempf (4): > dt-bindings: vendor-prefixes: Add Jenson Display > dt-bindings: display: panel-lvds: Add compatible for Jenson > BL-JT60050-01A > arm64: dts: imx8mm-kontron: Add support for display bridges on BL > i.MX8MM > arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS > support Gentle ping for this series. Neil proposed to apply path 1 and 2 to drm-misc-next. Shawn, can you review/apply patch 3 and 4, please? Thanks Frieder
