Re: [PATCH v2 05/22] drm/msm/dpu: move resource allocation to CRTC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 9/25/2024 2:11 PM, Dmitry Baryshkov wrote:
On Wed, 25 Sept 2024 at 22:39, Jessica Zhang <quic_jesszhan@xxxxxxxxxxx> wrote:



On 9/24/2024 4:13 PM, Dmitry Baryshkov wrote:
On Tue, Sep 24, 2024 at 03:59:21PM GMT, Jessica Zhang wrote:
From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

All resource allocation is centered around the LMs. Then other blocks
(except DSCs) are allocated basing on the LMs that was selected, and LM
powers up the CRTC rather than the encoder.

Moreover if at some point the driver supports encoder cloning,
allocating resources from the encoder will be incorrect, as all clones
will have different encoder IDs, while LMs are to be shared by these
encoders.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
[quic_abhinavk@xxxxxxxxxxx: Refactored resource allocation for CDM]
Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
[quic_jesszhan@xxxxxxxxxxx: Changed to grabbing exising global state]
Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
   drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    |  86 ++++++++++++
   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 201 +++++++++++-----------------
   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h |  19 +++
   3 files changed, 183 insertions(+), 123 deletions(-)

@@ -544,159 +542,117 @@ void dpu_encoder_helper_split_config(
      }
   }

-bool dpu_encoder_use_dsc_merge(struct drm_encoder *drm_enc)
+void dpu_encoder_update_topology(struct drm_encoder *drm_enc,
+                             struct msm_display_topology *topology,
+                             struct drm_atomic_state *state,
+                             const struct drm_display_mode *adj_mode)
   {
      struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
-    int i, intf_count = 0, num_dsc = 0;
+    struct drm_connector *connector;
+    struct drm_connector_state *conn_state;
+    struct msm_display_info *disp_info;
+    struct drm_framebuffer *fb;
+    struct msm_drm_private *priv;
+    int i;

      for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++)
              if (dpu_enc->phys_encs[i])
-                    intf_count++;
+                    topology->num_intf++;

-    /* See dpu_encoder_get_topology, we only support 2:2:1 topology */
+    /* We only support 2 DSC mode (with 2 LM and 1 INTF) */
      if (dpu_enc->dsc)
-            num_dsc = 2;
+            topology->num_dsc += 2;

-    return (num_dsc > 0) && (num_dsc > intf_count);
-}
+    connector = drm_atomic_get_new_connector_for_encoder(state, drm_enc);
+    if (!connector)
+            return;
+    conn_state = drm_atomic_get_new_connector_state(state, connector);
+    if (!conn_state)
+            return;

-struct drm_dsc_config *dpu_encoder_get_dsc_config(struct drm_encoder *drm_enc)
-{
-    struct msm_drm_private *priv = drm_enc->dev->dev_private;
-    struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
-    int index = dpu_enc->disp_info.h_tile_instance[0];
+    disp_info = &dpu_enc->disp_info;

-    if (dpu_enc->disp_info.intf_type == INTF_DSI)
-            return msm_dsi_get_dsc_config(priv->dsi[index]);
+    priv = drm_enc->dev->dev_private;

-    return NULL;
+    /*
+     * Use CDM only for writeback or DP at the moment as other interfaces cannot handle it.
+     * If writeback itself cannot handle cdm for some reason it will fail in its atomic_check()
+     * earlier.
+     */
+    if (disp_info->intf_type == INTF_WB && conn_state->writeback_job) {
+            fb = conn_state->writeback_job->fb;
+
+            if (fb && MSM_FORMAT_IS_YUV(msm_framebuffer_format(fb)))
+                    topology->needs_cdm = true;
+    } else if (disp_info->intf_type == INTF_DP) {
+            if (msm_dp_is_yuv_420_enabled(priv->dp[disp_info->h_tile_instance[0]], adj_mode))
+                    topology->needs_cdm = true;
+    }

Just to note, the needs_cdm is not enough once you introduce CWB
support. E.g. DP/YUV420 + WB/YUV case requires two CDM blocks (which we
don't have), but this doesn't get reflected in the topology.

Hi Dmitry,

Ack. I can add something to make atomic_check fail if the input FB is
YUV format and CWB is enabled.

I'd prefer for this to be more natural rather than just checking for
the DP && DP_YUV420 && WB && WB_FMT_YUV. In the worst case, count CDM
requests and then in RM check them against the catalog. But I had a
more logical (although more intrusive) implementation on my mind:

struct msm_display_topology {
     struct {
       u32 num_intf;
       u32 num_wb;
       u32 num_dsc;
       bool needs_cdm;
     } outputs[MAX_OUTPUTS];
     u32 num_lm;
};

WDYT?


the struct msm_display_topology was originally designed as a per-encoder struct (dpu_encoder_get_topology() indicates the same). Making this an array of outputs was not needed as there is expected to be one struct msm_display_topology for each virt encoder's requested topology and the blocks inside of it other than LM, are "encoder" hw blocks.

needs_cdm was made a boolean instead of a num_cdm_count like other hardware blocks because till the most recent chipset, we have only one CDM block. Whenever we do have more CDM blocks why will introducing num_cdm to the topology struct not solve your problem rather than making it an array of outputs?

Because then, RM will know that the request exceeds the max blocks.

I think what you are trying to do now is make struct msm_display_topology's encoder parts per-encoder and rest like num_lm per "RM session".

The thought is not wrong but at the same time seems a bit of an overkill because its mostly already like that. Apart from CDM for which I have no indication of another one getting added, rest of the blocks are already aligned towards a per-encoder model and not a "RM session" model.

Even if we end up doing it this way, most of the model is kind of unused really because each encoder will request its own topology anyway, there is just no aggregation for CDM which at this point is not needed as there is no HW we are aware of needing this.

I think the atomic_check validation is needed either way because if two encoders request cdm, we cannot do clone mode as there is only one cdm block today. Its just that we are not tracking num_cdm today due to reasons explained above but basically doing something like below seems right to me:

if (enc_is_in_clone_mode && needs_cdm)
	return -ENOTSUPPORTED;

When we add more cdm_blocks, we can drop this check and making needs_cdm a num_cdm will make it naturally fail.


Thanks,

Jessica Zhang


   }

--
With best wishes
Dmitry






[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux