Re: [PATCH v2 05/22] drm/msm/dpu: move resource allocation to CRTC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 24, 2024 at 03:59:21PM GMT, Jessica Zhang wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> 
> All resource allocation is centered around the LMs. Then other blocks
> (except DSCs) are allocated basing on the LMs that was selected, and LM
> powers up the CRTC rather than the encoder.
> 
> Moreover if at some point the driver supports encoder cloning,
> allocating resources from the encoder will be incorrect, as all clones
> will have different encoder IDs, while LMs are to be shared by these
> encoders.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> [quic_abhinavk@xxxxxxxxxxx: Refactored resource allocation for CDM]
> Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
> [quic_jesszhan@xxxxxxxxxxx: Changed to grabbing exising global state]
> Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    |  86 ++++++++++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 201 +++++++++++-----------------
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h |  19 +++
>  3 files changed, 183 insertions(+), 123 deletions(-)
> 
> @@ -544,159 +542,117 @@ void dpu_encoder_helper_split_config(
>  	}
>  }
>  
> -bool dpu_encoder_use_dsc_merge(struct drm_encoder *drm_enc)
> +void dpu_encoder_update_topology(struct drm_encoder *drm_enc,
> +				 struct msm_display_topology *topology,
> +				 struct drm_atomic_state *state,
> +				 const struct drm_display_mode *adj_mode)
>  {
>  	struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
> -	int i, intf_count = 0, num_dsc = 0;
> +	struct drm_connector *connector;
> +	struct drm_connector_state *conn_state;
> +	struct msm_display_info *disp_info;
> +	struct drm_framebuffer *fb;
> +	struct msm_drm_private *priv;
> +	int i;
>  
>  	for (i = 0; i < MAX_PHYS_ENCODERS_PER_VIRTUAL; i++)
>  		if (dpu_enc->phys_encs[i])
> -			intf_count++;
> +			topology->num_intf++;
>  
> -	/* See dpu_encoder_get_topology, we only support 2:2:1 topology */
> +	/* We only support 2 DSC mode (with 2 LM and 1 INTF) */
>  	if (dpu_enc->dsc)
> -		num_dsc = 2;
> +		topology->num_dsc += 2;
>  
> -	return (num_dsc > 0) && (num_dsc > intf_count);
> -}
> +	connector = drm_atomic_get_new_connector_for_encoder(state, drm_enc);
> +	if (!connector)
> +		return;
> +	conn_state = drm_atomic_get_new_connector_state(state, connector);
> +	if (!conn_state)
> +		return;
>  
> -struct drm_dsc_config *dpu_encoder_get_dsc_config(struct drm_encoder *drm_enc)
> -{
> -	struct msm_drm_private *priv = drm_enc->dev->dev_private;
> -	struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
> -	int index = dpu_enc->disp_info.h_tile_instance[0];
> +	disp_info = &dpu_enc->disp_info;
>  
> -	if (dpu_enc->disp_info.intf_type == INTF_DSI)
> -		return msm_dsi_get_dsc_config(priv->dsi[index]);
> +	priv = drm_enc->dev->dev_private;
>  
> -	return NULL;
> +	/*
> +	 * Use CDM only for writeback or DP at the moment as other interfaces cannot handle it.
> +	 * If writeback itself cannot handle cdm for some reason it will fail in its atomic_check()
> +	 * earlier.
> +	 */
> +	if (disp_info->intf_type == INTF_WB && conn_state->writeback_job) {
> +		fb = conn_state->writeback_job->fb;
> +
> +		if (fb && MSM_FORMAT_IS_YUV(msm_framebuffer_format(fb)))
> +			topology->needs_cdm = true;
> +	} else if (disp_info->intf_type == INTF_DP) {
> +		if (msm_dp_is_yuv_420_enabled(priv->dp[disp_info->h_tile_instance[0]], adj_mode))
> +			topology->needs_cdm = true;
> +	}

Just to note, the needs_cdm is not enough once you introduce CWB
support. E.g. DP/YUV420 + WB/YUV case requires two CDM blocks (which we
don't have), but this doesn't get reflected in the topology.

>  }
>  
-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux