RE: [PATCH v2 5/9] drm: renesas: rz-du: Add RZ/G2UL DU Support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

Thanks for the feedback.

> -----Original Message-----
> From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Sent: Saturday, July 27, 2024 2:00 AM
> Subject: Re: [PATCH v2 5/9] drm: renesas: rz-du: Add RZ/G2UL DU Support
> 
> Hi Biju,
> 
> Thank you for the patch.
> 
> On Tue, Jul 09, 2024 at 02:51:43PM +0100, Biju Das wrote:
> > The LCD controller is composed of Frame Compression Processor (FCPVD),
> > Video Signal Processor (VSPD), and Display Unit (DU).
> >
> > It has DPI interface and supports a maximum resolution of WXGA along
> > with 2 RPFs to support the blending of two picture layers and raster
> > operations (ROPs).
> >
> > The DU module is connected to VSPD. Add RZ/G2UL DU support.
> >
> > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> > v1->v2:
> >  * No change.
> > ---
> >  drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c |  9 ++++++++-
> > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c  | 11 +++++++++++
> >  2 files changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > index 6e7aac6219be..b1812f947252 100644
> > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c
> > @@ -28,6 +28,7 @@
> >  #include "rzg2l_du_vsp.h"
> >
> >  #define DU_MCR0			0x00
> > +#define DU_MCR0_DPI_OE		BIT(0)
> >  #define DU_MCR0_DI_EN		BIT(8)
> >
> >  #define DU_DITR0		0x10
> > @@ -216,9 +217,15 @@ static void rzg2l_du_crtc_put(struct
> > rzg2l_du_crtc *rcrtc)
> >
> >  static void rzg2l_du_start_stop(struct rzg2l_du_crtc *rcrtc, bool
> > start)  {
> > +	struct rzg2l_du_crtc_state *rstate =
> > +					to_rzg2l_crtc_state(rcrtc->crtc.state);
> 
> I think you can avoid the line break here.

OK, I will make it inlined.

> 
> >  	struct rzg2l_du_device *rcdu = rcrtc->dev;
> > +	u32 val = DU_MCR0_DI_EN;
> >
> > -	writel(start ? DU_MCR0_DI_EN : 0, rcdu->mmio + DU_MCR0);
> > +	if (rstate->outputs == BIT(RZG2L_DU_OUTPUT_DPAD0))
> > +		val |= DU_MCR0_DPI_OE;
> > +
> > +	writel(start ? val : 0, rcdu->mmio + DU_MCR0);
> >  }
> >
> >  static void rzg2l_du_crtc_start(struct rzg2l_du_crtc *rcrtc) diff
> > --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > index e5eca8691a33..34534441b7ec 100644
> > --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> > @@ -25,6 +25,16 @@
> >   * Device Information
> >   */
> >
> > +static const struct rzg2l_du_device_info rzg2l_du_r9a07g043u_info = {
> > +	.channels_mask = BIT(0),
> > +	.routes = {
> > +		[RZG2L_DU_OUTPUT_DPAD0] = {
> > +			.possible_outputs = BIT(0),
> > +			.port = 1,
> 
> This may need to be port 0 depending on the outcome of the discussion on the DT bindings.

Agreed.

Cheers,
Biju




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux