[PATCH v2 3/3] dt-bindings: display: panel: correct Anbernic RG35XX panel example

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



make dt_bindings_check reports that sck-gpios and num-chipselects are
required for spi nodes, therefore add these to the example.

Signed-off-by: Ryan Walklin <ryan@xxxxxxxxxxxxx>
---
 .../bindings/display/panel/anbernic,wl-355608-a8.yaml          | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/anbernic,wl-355608-a8.yaml b/Documentation/devicetree/bindings/display/panel/anbernic,wl-355608-a8.yaml
index dde3600f0189c..bbe016453c9b2 100644
--- a/Documentation/devicetree/bindings/display/panel/anbernic,wl-355608-a8.yaml
+++ b/Documentation/devicetree/bindings/display/panel/anbernic,wl-355608-a8.yaml
@@ -40,6 +40,9 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
+        sck-gpios = <&pio 8 9 GPIO_ACTIVE_HIGH>; // PI9
+        num-chipselects = <1>;
+
         panel@0 {
             compatible = "anbernic,wl-355608-a8";
             reg = <0>;
-- 
2.45.2




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux