The HVS can change AXI request mode based on how full the COB FIFOs are. Until now the vc4 driver has been relying on the firmware to have set these to sensible values. With HVS channel 2 now being used for live video, change the panic mode for all channels to be explicitly set by the driver, and the same for all channels. Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/vc4/vc4_hvs.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c index 04af672caacb..267c9fde7362 100644 --- a/drivers/gpu/drm/vc4/vc4_hvs.c +++ b/drivers/gpu/drm/vc4/vc4_hvs.c @@ -951,6 +951,17 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data) SCALER_DISPCTRL_SCLEIRQ); + /* Set AXI panic mode. + * VC4 panics when < 2 lines in FIFO. + * VC5 panics when less than 1 line in the FIFO. + */ + dispctrl &= ~(SCALER_DISPCTRL_PANIC0_MASK | + SCALER_DISPCTRL_PANIC1_MASK | + SCALER_DISPCTRL_PANIC2_MASK); + dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC0); + dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC1); + dispctrl |= VC4_SET_FIELD(2, SCALER_DISPCTRL_PANIC2); + /* Set AXI panic mode. * VC4 panics when < 2 lines in FIFO. * VC5 panics when less than 1 line in the FIFO. -- 2.34.1
