Re: [PATCH 2/2] drm: panel: nv3052c: Add WL-355608-A8 panel

Jessica Zhang <quic_jesszhan@xxxxxxxxxxx> · Wed, 29 May 2024 13:38:46 -0700

On 5/24/2024 3:33 AM, Ryan Walklin wrote:
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown
OEM, used in a number of handheld gaming devices made by Anbernic.

Limited information is available online however the panel timing values
(below) have been obtained from the vendor BSP. The panel appears to
integrate a NV3052C LCD driver (or clone). Available devices address it
in SPI/RGB mode, with the timing signals generated from the device
SoC (in testing hardware an Allwinner H700) and passed through.

Add a panel definition and display mode to the existing NV3502C driver.

It was assumed during bringup that the initialisation sequence was the
same as the existing Fascontek FS035VG158 panel, proved working during
experimentation. However subsequent dumping of the init sequence with a
logic analyser confirms one small change to VCOM_ADJ3 from 0x4a to 0x44,
therefore a separate set of registers is also added.

Timings:
            | Active |  FP  | Sync |  BP  | Total
-----------|--------|------|------|------|-------
Horizontal |   640  |  64  |  20  |  46  |  770
   Vertical |   480  |  21  |   4  |  15  |  520

Signed-off-by: Ryan Walklin <ryan@xxxxxxxxxxxxx>
Co-developed-by: Hironori KIKUCHI <kikuchan98@xxxxxxxxx>

Hi Ryan,

Thanks for the patch. It LGTM -- will give it another look when you 
release the v2 with updated compatible string.

Thanks,

Jessica Zhang

---
  .../gpu/drm/panel/panel-newvision-nv3052c.c   | 225 ++++++++++++++++++
  1 file changed, 225 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
index 1aab0c9ae..5de36ecec 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -433,6 +433,202 @@ static const struct nv3052c_reg fs035vg158_panel_regs[] = {
  	{ 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
  };
  
+
+static const struct nv3052c_reg wl_355608_a8_panel_regs[] = {
+	// EXTC Command set enable, select page 1
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 },
+	// Mostly unknown registers
+	{ 0xe3, 0x00 },
+	{ 0x40, 0x00 },
+	{ 0x03, 0x40 },
+	{ 0x04, 0x00 },
+	{ 0x05, 0x03 },
+	{ 0x08, 0x00 },
+	{ 0x09, 0x07 },
+	{ 0x0a, 0x01 },
+	{ 0x0b, 0x32 },
+	{ 0x0c, 0x32 },
+	{ 0x0d, 0x0b },
+	{ 0x0e, 0x00 },
+	{ 0x23, 0xa0 },
+	{ 0x24, 0x0c },
+	{ 0x25, 0x06 },
+	{ 0x26, 0x14 },
+	{ 0x27, 0x14 },
+	{ 0x38, 0xcc }, // VCOM_ADJ1
+	{ 0x39, 0xd7 }, // VCOM_ADJ2
+	{ 0x3a, 0x44 }, // VCOM_ADJ3
+	{ 0x28, 0x40 },
+	{ 0x29, 0x01 },
+	{ 0x2a, 0xdf },
+	{ 0x49, 0x3c },
+	{ 0x91, 0x77 }, // EXTPW_CTRL2
+	{ 0x92, 0x77 }, // EXTPW_CTRL3
+	{ 0xa0, 0x55 },
+	{ 0xa1, 0x50 },
+	{ 0xa4, 0x9c },
+	{ 0xa7, 0x02 },
+	{ 0xa8, 0x01 },
+	{ 0xa9, 0x01 },
+	{ 0xaa, 0xfc },
+	{ 0xab, 0x28 },
+	{ 0xac, 0x06 },
+	{ 0xad, 0x06 },
+	{ 0xae, 0x06 },
+	{ 0xaf, 0x03 },
+	{ 0xb0, 0x08 },
+	{ 0xb1, 0x26 },
+	{ 0xb2, 0x28 },
+	{ 0xb3, 0x28 },
+	{ 0xb4, 0x33 },
+	{ 0xb5, 0x08 },
+	{ 0xb6, 0x26 },
+	{ 0xb7, 0x08 },
+	{ 0xb8, 0x26 },
+	{ 0xf0, 0x00 },
+	{ 0xf6, 0xc0 },
+	// EXTC Command set enable, select page 2
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+	// Set gray scale voltage to adjust gamma
+	{ 0xb0, 0x0b }, // PGAMVR0
+	{ 0xb1, 0x16 }, // PGAMVR1
+	{ 0xb2, 0x17 }, // PGAMVR2
+	{ 0xb3, 0x2c }, // PGAMVR3
+	{ 0xb4, 0x32 }, // PGAMVR4
+	{ 0xb5, 0x3b }, // PGAMVR5
+	{ 0xb6, 0x29 }, // PGAMPR0
+	{ 0xb7, 0x40 }, // PGAMPR1
+	{ 0xb8, 0x0d }, // PGAMPK0
+	{ 0xb9, 0x05 }, // PGAMPK1
+	{ 0xba, 0x12 }, // PGAMPK2
+	{ 0xbb, 0x10 }, // PGAMPK3
+	{ 0xbc, 0x12 }, // PGAMPK4
+	{ 0xbd, 0x15 }, // PGAMPK5
+	{ 0xbe, 0x19 }, // PGAMPK6
+	{ 0xbf, 0x0e }, // PGAMPK7
+	{ 0xc0, 0x16 }, // PGAMPK8
+	{ 0xc1, 0x0a }, // PGAMPK9
+	// Set gray scale voltage to adjust gamma
+	{ 0xd0, 0x0c }, // NGAMVR0
+	{ 0xd1, 0x17 }, // NGAMVR0
+	{ 0xd2, 0x14 }, // NGAMVR1
+	{ 0xd3, 0x2e }, // NGAMVR2
+	{ 0xd4, 0x32 }, // NGAMVR3
+	{ 0xd5, 0x3c }, // NGAMVR4
+	{ 0xd6, 0x22 }, // NGAMPR0
+	{ 0xd7, 0x3d }, // NGAMPR1
+	{ 0xd8, 0x0d }, // NGAMPK0
+	{ 0xd9, 0x07 }, // NGAMPK1
+	{ 0xda, 0x13 }, // NGAMPK2
+	{ 0xdb, 0x13 }, // NGAMPK3
+	{ 0xdc, 0x11 }, // NGAMPK4
+	{ 0xdd, 0x15 }, // NGAMPK5
+	{ 0xde, 0x19 }, // NGAMPK6
+	{ 0xdf, 0x10 }, // NGAMPK7
+	{ 0xe0, 0x17 }, // NGAMPK8
+	{ 0xe1, 0x0a }, // NGAMPK9
+	// EXTC Command set enable, select page 3
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x03 },
+	// Set various timing settings
+	{ 0x00, 0x2a }, // GIP_VST_1
+	{ 0x01, 0x2a }, // GIP_VST_2
+	{ 0x02, 0x2a }, // GIP_VST_3
+	{ 0x03, 0x2a }, // GIP_VST_4
+	{ 0x04, 0x61 }, // GIP_VST_5
+	{ 0x05, 0x80 }, // GIP_VST_6
+	{ 0x06, 0xc7 }, // GIP_VST_7
+	{ 0x07, 0x01 }, // GIP_VST_8
+	{ 0x08, 0x03 }, // GIP_VST_9
+	{ 0x09, 0x04 }, // GIP_VST_10
+	{ 0x70, 0x22 }, // GIP_ECLK1
+	{ 0x71, 0x80 }, // GIP_ECLK2
+	{ 0x30, 0x2a }, // GIP_CLK_1
+	{ 0x31, 0x2a }, // GIP_CLK_2
+	{ 0x32, 0x2a }, // GIP_CLK_3
+	{ 0x33, 0x2a }, // GIP_CLK_4
+	{ 0x34, 0x61 }, // GIP_CLK_5
+	{ 0x35, 0xc5 }, // GIP_CLK_6
+	{ 0x36, 0x80 }, // GIP_CLK_7
+	{ 0x37, 0x23 }, // GIP_CLK_8
+	{ 0x40, 0x03 }, // GIP_CLKA_1
+	{ 0x41, 0x04 }, // GIP_CLKA_2
+	{ 0x42, 0x05 }, // GIP_CLKA_3
+	{ 0x43, 0x06 }, // GIP_CLKA_4
+	{ 0x44, 0x11 }, // GIP_CLKA_5
+	{ 0x45, 0xe8 }, // GIP_CLKA_6
+	{ 0x46, 0xe9 }, // GIP_CLKA_7
+	{ 0x47, 0x11 }, // GIP_CLKA_8
+	{ 0x48, 0xea }, // GIP_CLKA_9
+	{ 0x49, 0xeb }, // GIP_CLKA_10
+	{ 0x50, 0x07 }, // GIP_CLKB_1
+	{ 0x51, 0x08 }, // GIP_CLKB_2
+	{ 0x52, 0x09 }, // GIP_CLKB_3
+	{ 0x53, 0x0a }, // GIP_CLKB_4
+	{ 0x54, 0x11 }, // GIP_CLKB_5
+	{ 0x55, 0xec }, // GIP_CLKB_6
+	{ 0x56, 0xed }, // GIP_CLKB_7
+	{ 0x57, 0x11 }, // GIP_CLKB_8
+	{ 0x58, 0xef }, // GIP_CLKB_9
+	{ 0x59, 0xf0 }, // GIP_CLKB_10
+	// Map internal GOA signals to GOA output pad
+	{ 0xb1, 0x01 }, // PANELD2U2
+	{ 0xb4, 0x15 }, // PANELD2U5
+	{ 0xb5, 0x16 }, // PANELD2U6
+	{ 0xb6, 0x09 }, // PANELD2U7
+	{ 0xb7, 0x0f }, // PANELD2U8
+	{ 0xb8, 0x0d }, // PANELD2U9
+	{ 0xb9, 0x0b }, // PANELD2U10
+	{ 0xba, 0x00 }, // PANELD2U11
+	{ 0xc7, 0x02 }, // PANELD2U24
+	{ 0xca, 0x17 }, // PANELD2U27
+	{ 0xcb, 0x18 }, // PANELD2U28
+	{ 0xcc, 0x0a }, // PANELD2U29
+	{ 0xcd, 0x10 }, // PANELD2U30
+	{ 0xce, 0x0e }, // PANELD2U31
+	{ 0xcf, 0x0c }, // PANELD2U32
+	{ 0xd0, 0x00 }, // PANELD2U33
+	// Map internal GOA signals to GOA output pad
+	{ 0x81, 0x00 }, // PANELU2D2
+	{ 0x84, 0x15 }, // PANELU2D5
+	{ 0x85, 0x16 }, // PANELU2D6
+	{ 0x86, 0x10 }, // PANELU2D7
+	{ 0x87, 0x0a }, // PANELU2D8
+	{ 0x88, 0x0c }, // PANELU2D9
+	{ 0x89, 0x0e }, // PANELU2D10
+	{ 0x8a, 0x02 }, // PANELU2D11
+	{ 0x97, 0x00 }, // PANELU2D24
+	{ 0x9a, 0x17 }, // PANELU2D27
+	{ 0x9b, 0x18 }, // PANELU2D28
+	{ 0x9c, 0x0f }, // PANELU2D29
+	{ 0x9d, 0x09 }, // PANELU2D30
+	{ 0x9e, 0x0b }, // PANELU2D31
+	{ 0x9f, 0x0d }, // PANELU2D32
+	{ 0xa0, 0x01 }, // PANELU2D33
+	// EXTC Command set enable, select page 2
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x02 },
+	// Unknown registers
+	{ 0x01, 0x01 },
+	{ 0x02, 0xda },
+	{ 0x03, 0xba },
+	{ 0x04, 0xa8 },
+	{ 0x05, 0x9a },
+	{ 0x06, 0x70 },
+	{ 0x07, 0xff },
+	{ 0x08, 0x91 },
+	{ 0x09, 0x90 },
+	{ 0x0a, 0xff },
+	{ 0x0b, 0x8f },
+	{ 0x0c, 0x60 },
+	{ 0x0d, 0x58 },
+	{ 0x0e, 0x48 },
+	{ 0x0f, 0x38 },
+	{ 0x10, 0x2b },
+	// EXTC Command set enable, select page 0
+	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x00 },
+	// Display Access Control
+	{ 0x36, 0x0a }, // bgr = 1, ss = 1, gs = 0
+};
+
  static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
  {
  	return container_of(panel, struct nv3052c, panel);
@@ -670,6 +866,21 @@ static const struct drm_display_mode fs035vg158_modes[] = {
  	},
  };
  
+static const struct drm_display_mode wl_355608_a8_mode[] = {
+	{
+		.clock = 24000,
+		.hdisplay = 640,
+		.hsync_start = 640 + 64,
+		.hsync_end = 640 + 64 + 20,
+		.htotal = 640 + 64 + 20 + 46,
+		.vdisplay = 480,
+		.vsync_start = 480 + 21,
+		.vsync_end = 480 + 21 + 4,
+		.vtotal = 480 + 21 + 4 + 15,
+		.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+	},
+};
+
  static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
  	.display_modes = ltk035c5444t_modes,
  	.num_modes = ARRAY_SIZE(ltk035c5444t_modes),
@@ -692,9 +903,21 @@ static const struct nv3052c_panel_info fs035vg158_panel_info = {
  	.panel_regs_len = ARRAY_SIZE(fs035vg158_panel_regs),
  };
  
+static const struct nv3052c_panel_info wl_355608_a8_panel_info = {
+	.display_modes = wl_355608_a8_mode,
+	.num_modes = ARRAY_SIZE(wl_355608_a8_mode),
+	.width_mm = 150,
+	.height_mm = 94,
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.panel_regs = wl_355608_a8_panel_regs,
+	.panel_regs_len = ARRAY_SIZE(wl_355608_a8_panel_regs),
+};
+
  static const struct spi_device_id nv3052c_ids[] = {
  	{ "ltk035c5444t", },
  	{ "fs035vg158", },
+	{ "wl_355608_a8", },
  	{ /* sentinel */ }
  };
  MODULE_DEVICE_TABLE(spi, nv3052c_ids);
@@ -702,6 +925,7 @@ MODULE_DEVICE_TABLE(spi, nv3052c_ids);
  static const struct of_device_id nv3052c_of_match[] = {
  	{ .compatible = "leadtek,ltk035c5444t", .data = &ltk035c5444t_panel_info },
  	{ .compatible = "fascontek,fs035vg158", .data = &fs035vg158_panel_info },
+	{ .compatible = "wl_355608_a8", .data = &wl_355608_a8_panel_info },
  	{ /* sentinel */ }
  };
  MODULE_DEVICE_TABLE(of, nv3052c_of_match);
@@ -719,4 +943,5 @@ module_spi_driver(nv3052c_driver);
  
  MODULE_AUTHOR("Paul Cercueil <paul@xxxxxxxxxxxxxxx>");
  MODULE_AUTHOR("Christophe Branchereau <cbranchereau@xxxxxxxxx>");
+MODULE_AUTHOR("Ryan Walklin <ryan@xxxxxxxxxxxxx");
  MODULE_LICENSE("GPL v2");
--
2.45.1







