Hi All This series initially cleans up the BCM2835 DMA driver in preparation for supporting the 40bit version. It then fixes up the incorrect mapping behaviour we've had to date. The cleanups are based on Stefan Wahren's RFC [1], with a couple of minor bugs fixed, but stopping before actually adding the 40bit support. If we can sort the mapping issue, it avoids having to have workarounds in the 40bit support. The mapping issues were discussed in [2]. Up until this point all DMA users have been passing in dma addresses rather than CPU physical addresses, and the DMA driver has been using those directly rather than using dma_map_resource() to map them. The DT has also been missing some of the required mappings in "dma-ranges", but they have been present in "ranges". I've therefore duplicated the minimum amount of of_dma_get_range and translate_phys_to_dma to be able to use "ranges" as discussed in that thread. I'm assuming that sort of code is not desirable in the core code as it shouldn't be necessary, so keeping it contained within a driver is the better solution. When Andrea posted our downstream patches in [3], Robin Murphy stated that dma_map_resource is the correct API, but as it currently doesn't check the dma_range_map we need Sergey Semin's patch [4]. There seemed to be no follow up over the implications of it. I've therefore included it in the series at least for discussion. If it's not acceptable then I'm not sure of the route forward in fixing this mapping issue. I'm expecting there to be some discussion, but also acknowledge that merging this will need to be phased with the patches 1-13 needing to be merged before any of 14-17, and then 18 merged last to remove the workaround. I suspect that's the least of my worries though. I will apologise in advance if I don't respond immediately to comments - I'm out of the office for the next week, but do appreciate any feedback. Thanks Dave [1] https://lore.kernel.org/linux-arm-kernel/13ec386b-2305-27da-9765-8fa3ad71146c@xxxxxxxx/T/ [2] https://lore.kernel.org/linux-arm-kernel/CAPY8ntBua=wPVUj+SM0WGcUL0fT56uEHo8YZUTMB8Z54X_aPRw@xxxxxxxxxxxxxx/T/ [3] https://lore.kernel.org/lkml/cover.1706948717.git.andrea.porta@xxxxxxxx/T/ [4] https://lore.kernel.org/linux-iommu/20220610080802.11147-1-Sergey.Semin@xxxxxxxxxxxxxxxxxxxx/ Dave Stevenson (7): ARM: dts: bcm283x: Update to use dma-channel-mask dmaengine: bcm2835: Add function to handle DMA mapping dmaengine: bcm2835: Add backwards compatible handling until clients updated dmaengine: bcm2835: Use dma_map_resource to map addresses dmaengine: bcm2835: Read ranges if dma-ranges aren't mapped arm: dt: Add dma-ranges to the bcm283x platforms dmaengine: bcm2835: Revert the workaround for DMA addresses Phil Elwell (4): mmc: bcm2835: Use phys addresses for slave DMA config spi: bcm2835: Use phys addresses for slave DMA config drm/vc4: Use phys addresses for slave DMA config ASoC: bcm2835-i2s: Use phys addresses for DAI DMA Serge Semin (1): dma-direct: take dma-ranges/offsets into account in resource mapping Stefan Wahren (6): dmaengine: bcm2835: Support common dma-channel-mask dmaengine: bcm2835: move CB info generation into separate function dmaengine: bcm2835: move CB final extra info generation into function dmaengine: bcm2835: make address increment platform independent dmaengine: bcm2385: drop info parameters dmaengine: bcm2835: pass dma_chan to generic functions arch/arm/boot/dts/broadcom/bcm2711.dtsi | 14 +- .../arm/boot/dts/broadcom/bcm2835-common.dtsi | 2 +- arch/arm/boot/dts/broadcom/bcm2835.dtsi | 3 +- arch/arm/boot/dts/broadcom/bcm2836.dtsi | 3 +- arch/arm/boot/dts/broadcom/bcm2837.dtsi | 3 +- drivers/dma/bcm2835-dma.c | 432 ++++++++++++++---- drivers/gpu/drm/vc4/vc4_hdmi.c | 15 +- drivers/mmc/host/bcm2835.c | 17 +- drivers/spi/spi-bcm2835.c | 23 +- kernel/dma/direct.c | 2 +- sound/soc/bcm/bcm2835-i2s.c | 18 +- 11 files changed, 383 insertions(+), 149 deletions(-) -- 2.34.1
