On Sat, Feb 17, 2024 at 12:02:58PM +0100, Raphael Gallais-Pou wrote: > Setting a panel-timing in the device-tree overwrite the one specified in > the driver and set it as preferred. In that case 'height-mm', > 'width-mm' and 'panel-timing' are properties that can be use for simple > panels, according to panel-common.yaml > > Fixes following warnings: > arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: 'height-mm', 'panel-timing', 'width-mm' do not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml# > > Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@xxxxxxxxxxx> > --- > Documentation/devicetree/bindings/display/panel/panel-simple.yaml | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml > index 634a10c6f2dd..c02cbbc7a100 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml > +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml > @@ -352,6 +352,9 @@ properties: > no-hpd: true > hpd-gpios: true > data-mapping: true > + height-mm: true > + width-mm: true > + panel-timing: true Instead, just change 'additionalProperties' to 'unevaluateProperties' and drop all these 'prop: true' lines. Pretty much anything from panel-common.yaml should be allowed. Rob
