Setting a panel-timing in the device-tree overwrite the one specified in the driver and set it as preferred. In that case 'height-mm', 'width-mm' and 'panel-timing' are properties that can be use for simple panels, according to panel-common.yaml Fixes following warnings: arch/arm/boot/dts/st/stm32mp135f-dk.dtb: panel-rgb: 'height-mm', 'panel-timing', 'width-mm' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml# Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@xxxxxxxxxxx> --- Documentation/devicetree/bindings/display/panel/panel-simple.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 634a10c6f2dd..c02cbbc7a100 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -352,6 +352,9 @@ properties: no-hpd: true hpd-gpios: true data-mapping: true + height-mm: true + width-mm: true + panel-timing: true if: not: -- 2.25.1
