Re: [PATCH v2 5/6] drm/panel: st7703: Drive XBD599 panel at higher clock rate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dne ponedeljek, 05. februar 2024 ob 16:22:28 CET je Frank Oltmanns napisal(a):
> This panel is used in the pinephone that runs on a Allwinner A64 SOC.
> The SOC requires pll-mipi to run at more than 500 MHz.
> 
> This is the relevant clock tree:
>  pll-mipi
>     tcon0
>        tcon-data-clock
> 
> tcon-data-clock has to run at 1/4 the DSI per-lane bit rate. The XBD599
> has 24 bpp and 4 lanes. Therefore, the resulting requested
> tcon-data-clock rate is:
>     crtc_clock * 1000 * (24 / 4) / 4
> 
> tcon-data-clock runs at tcon0 / 4 (fixed divisor), so it requests a
> parent rate of
>     4 * (crtc_clock * 1000 * (24 / 4) / 4)
> 
> Since tcon0 is a ccu_mux, the rate of tcon0 equals the rate of pll-mipi.
> 
> pll-mipi's constraint to run at 500MHz or higher forces us to have a
> crtc_clock >= 83333 kHz if we want a 60 Hz vertical refresh rate.
> 
> Change [hv]sync_(start|end) so that we reach a clock rate of 83502 kHz
> so that it is high enough to align with pll-pipi limits.

Typo: pll-pipi -> pll-mipi

Best regards,
Jernej

> 
> Signed-off-by: Frank Oltmanns <frank@xxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/panel/panel-sitronix-st7703.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> index b55bafd1a8be..6886fd7f765e 100644
> --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> @@ -320,14 +320,14 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>  
>  static const struct drm_display_mode xbd599_mode = {
>  	.hdisplay    = 720,
> -	.hsync_start = 720 + 40,
> -	.hsync_end   = 720 + 40 + 40,
> -	.htotal	     = 720 + 40 + 40 + 40,
> +	.hsync_start = 720 + 65,
> +	.hsync_end   = 720 + 65 + 65,
> +	.htotal      = 720 + 65 + 65 + 65,
>  	.vdisplay    = 1440,
> -	.vsync_start = 1440 + 18,
> -	.vsync_end   = 1440 + 18 + 10,
> -	.vtotal	     = 1440 + 18 + 10 + 17,
> -	.clock	     = 69000,
> +	.vsync_start = 1440 + 30,
> +	.vsync_end   = 1440 + 30 + 22,
> +	.vtotal	     = 1440 + 30 + 22 + 29,
> +	.clock	     = (720 + 65 + 65 + 65) * (1440 + 30 + 22 + 29) * 60 / 1000,
>  	.flags	     = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
>  	.width_mm    = 68,
>  	.height_mm   = 136,
> 
> 







[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux