From: Tomer Tayar <ttayar@xxxxxxxxx> When the DRAM region size in the BAR is not a power of 2, calculating the corresponding BAR base address should be done using the offset from the DRAM start address, and not using directly the DRAM address. Signed-off-by: Tomer Tayar <ttayar@xxxxxxxxx> Reviewed-by: Oded Gabbay <ogabbay@xxxxxxxxxx> Signed-off-by: Oded Gabbay <ogabbay@xxxxxxxxxx> --- drivers/accel/habanalabs/common/device.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/accel/habanalabs/common/device.c b/drivers/accel/habanalabs/common/device.c index 514459396818..15891de6cf39 100644 --- a/drivers/accel/habanalabs/common/device.c +++ b/drivers/accel/habanalabs/common/device.c @@ -55,7 +55,8 @@ static u64 hl_set_dram_bar(struct hl_device *hdev, u64 addr, struct pci_mem_regi if (is_power_of_2(prop->dram_pci_bar_size)) bar_base_addr = addr & ~(prop->dram_pci_bar_size - 0x1ull); else - bar_base_addr = DIV_ROUND_DOWN_ULL(addr, prop->dram_pci_bar_size) * + bar_base_addr = region->region_base + + div64_u64((addr - region->region_base), prop->dram_pci_bar_size) * prop->dram_pci_bar_size; old_base = hdev->asic_funcs->set_dram_bar_base(hdev, bar_base_addr); -- 2.34.1
