[PATCH v2 01/10] dt-bindings: display: bridge: tc358775: make stby gpio and vdd supplies optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Michael Walle <mwalle@xxxxxxxxxx>

For a normal operation, the vdd supplies nor the stby GPIO is needed.
There are boards, where these voltages are statically enabled during
board power-up.

The reset pin is required because once the PPI (PHY protocol interface)
is started, it can only be stopped by asserting the reset pin.

Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 .../devicetree/bindings/display/bridge/toshiba,tc358775.yaml   | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -68,9 +68,6 @@ properties:
 required:
   - compatible
   - reg
-  - vdd-supply
-  - vddio-supply
-  - stby-gpios
   - reset-gpios
   - ports
 
-- 
2.43.0



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux