Here's v2 of these changes merged with patches from Michael.
Regards,
Tony
Changes since v1:
- After a brief offline discussion with Michael, merge series with
Michael's patch series to make stby gpio and supplies optional as they
may be hardwired
- Use Michael's better patch for the jeida timings change
- Parse lanes on the bridge side like other bridge devices do, and if not
found, also parse on the DSI host side and warn
Michael Walle (3):
dt-bindings: display: bridge: tc358775: make stby gpio and vdd
supplies optional
drm/bridge: tc358775: fix support for jeida-18 and jeida-24
drm/bridge: tc358775: make standby GPIO optional
Tony Lindgren (7):
dt-bindings: display: bridge: tc358775: Add data-lanes
dt-bindings: display: bridge: tc358775: Add support for tc358765
drm/bridge: tc358775: Get bridge data lanes instead of the DSI host
lanes
drm/bridge: tc358775: Add burst and low-power modes
drm/bridge: tc358775: Enable pre_enable_prev_first flag
drm/bridge: tc358775: Add support for tc358765
drm/bridge: tc358775: Configure hs_rate and lp_rate
.../display/bridge/toshiba,tc358775.yaml | 30 +++++--
drivers/gpu/drm/bridge/tc358775.c | 90 +++++++++++--------
2 files changed, 75 insertions(+), 45 deletions(-)
--
2.43.0
